• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Rl 17

john south

Member
Joined
Jan 28, 2007
Messages
18
Is anyone useing this powder in 22-250 or 30-06? I've tryed in the 06 with not so good results.I really would like to use it,but if not does some one have some loads in these two cal?
 
I started fooling with RL17 in the 06 about a year ago. The most accurate load to date is 53gr using the 190gr Berger with a COAL of 3.345 which is .070 off the lands and at 2710fps. Quick Load shows when above 53gr pay close attention to pressure.
 
I have some R17 for 6.5 Creedmoor. It's like IMR4350. In fact, Alliant said to use 4350 data when there is no R17 data.

For 22-250, I have only used Varget, so I would recommend R-15 over R-17.

For 30-06, R-17 should be great since 30-06 is happy with R-15 through R19.
 
Last edited:
RL 17 very good in 338-06 A Square with 225 gr bullets

2700 FPS with 225gr Hornady
WW brass and WLRM primers at 61.0

Weatherby UL with 24"
 
Hornady prints load data for the A-MAX 6.5 Creedmoor on the side of the box. I think it is H4831 for the 140gr A-Max.
 
Last edited:
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top