New buyers here is what it really cost to build a 338....don't let the keyboard warriors tell you otherwise lol
A lot of people only think about the rifle cost —-and forget to consider the scope, load work, accessories, and the average 9 month wait for the builder - before you can get your hammer out to an honest 1 mile + accurately.
338 Edge
96 rounds; trajectory validated to 1,760 yds
(all items are new and only used during load development and trajectory validation)
RIFLE * indicates listed on build invoice - seller will PM invoice upon request
$185* M16 Extractor conversion
$185* 4.0 CF Mag box conversion
$185* PTG bottom metal LA OB REL
$395* 30" Hart Barrel Sendero 1:9 twist
$200* DE mini Slab Brake
$500* DE gunsmith work includes (Cerakote, open stock channel, barrel install, threaded case for OAL gauge)
following items provided to DE by customer
$1050 700 Remington LA blue printed & bolt fluted
$250 Jewell Trigger HVRTSBR-A – 1 lb. includes B, C springs
$960 McMillan Adj. A3 w/Edge technology in GAP CAMO
$116 Night force 40 MOA PIC RAIL (steel)
subtotal $3,981
SCOPE
Athlon Cronus 4.5-29x56 BTR MOA Ret w/illum, Seekins rings, Defender caps & bubble level
subtotal $2,020
ACCESSORIES * indicates listed on build invoice
$900 # Bushnell 1-Mile CONX RF and Kestrel 5700 sportsman (profile loaded & current software too)
$265* Redding Full Length "S" type bushing (two die set) w .365 bushing
$300* ADG Brass 50 virgin pieces & 48 twice fired during break in/load development 1 threaded for OAL gauge
$88 100ct Berger Elite Hunters 300 gr
subtotal $1,553
- $300 discount (see # above)
TOTAL COST $7,254 S/H included
________
Load Data: @ 7,700 ft., temp 32-60 degrees
CBTO 3.020 / COAL 3.927
BRASS: ADG
BULLET: Berger 300 gr. Elite Hunter (virtually the OTM)
POWDER: H 1000 (90.5 grains)
PRIMER: CCI 250
Ave Velocity: 2854 fps
SD 4 / ES 9
Group size: .4 or < (3 shots) @ 100 yards
A lot of people only think about the rifle cost —-and forget to consider the scope, load work, accessories, and the average 9 month wait for the builder - before you can get your hammer out to an honest 1 mile + accurately.
338 Edge
96 rounds; trajectory validated to 1,760 yds
(all items are new and only used during load development and trajectory validation)
RIFLE * indicates listed on build invoice - seller will PM invoice upon request
$185* M16 Extractor conversion
$185* 4.0 CF Mag box conversion
$185* PTG bottom metal LA OB REL
$395* 30" Hart Barrel Sendero 1:9 twist
$200* DE mini Slab Brake
$500* DE gunsmith work includes (Cerakote, open stock channel, barrel install, threaded case for OAL gauge)
following items provided to DE by customer
$1050 700 Remington LA blue printed & bolt fluted
$250 Jewell Trigger HVRTSBR-A – 1 lb. includes B, C springs
$960 McMillan Adj. A3 w/Edge technology in GAP CAMO
$116 Night force 40 MOA PIC RAIL (steel)
subtotal $3,981
SCOPE
Athlon Cronus 4.5-29x56 BTR MOA Ret w/illum, Seekins rings, Defender caps & bubble level
subtotal $2,020
ACCESSORIES * indicates listed on build invoice
$900 # Bushnell 1-Mile CONX RF and Kestrel 5700 sportsman (profile loaded & current software too)
$265* Redding Full Length "S" type bushing (two die set) w .365 bushing
$300* ADG Brass 50 virgin pieces & 48 twice fired during break in/load development 1 threaded for OAL gauge
$88 100ct Berger Elite Hunters 300 gr
subtotal $1,553
- $300 discount (see # above)
TOTAL COST $7,254 S/H included
________
Load Data: @ 7,700 ft., temp 32-60 degrees
CBTO 3.020 / COAL 3.927
BRASS: ADG
BULLET: Berger 300 gr. Elite Hunter (virtually the OTM)
POWDER: H 1000 (90.5 grains)
PRIMER: CCI 250
Ave Velocity: 2854 fps
SD 4 / ES 9
Group size: .4 or < (3 shots) @ 100 yards
Attachments
Last edited:
