SOLD/EXPIRED Rem 700P MLR 338 Lapua take off stock with bottom metal pillar bedded by RBros Rifles

[Autorotate]

Take off H-S 700P stock

MLR/Accurate Ordanance type factory bottom metal for a 338 Lapua allows for a COAL of 3.775

One factory mag

Karsten cheek piece

1" phelonic spacer for a 14.5" LOP

Pillar and Devcon 10110 bedded by Travis Reddel of RBros rifles

I believe Accurate Ordanance makes a CIP mag that will drop into this bottom metal that allows for a COAL of 3.815 if that's a concern. This would be an awesome stock to build a 30-338 Lapua repeater or a Norma mag repeater off of. The Lapua/Edge/Rums would be slight constrained for a repeater.

Replacement value would be over $500 after the pillar bedding/cheekpeice. I'm gonna say $400 shipped. Thanks for looking. gun)

Please use the Email link in my signature block if your interested.....I can't check this thread as easy as my email.

 

[sbruni]

Re: Rem 700P MLR 338 Lapua take off stock with bottom metal pillar bedded by RBros Ri

Can you throw in the back yard and the view... Good luck on the stock

 

[Autorotate]

Re: Rem 700P MLR 338 Lapua take off stock with bottom metal pillar bedded by RBros Ri

Can you throw in the back yard and the view... Good luck on the stock

We're blessed for sure! I come from humble beginnings...and will never forget 'em either gun)

Thanks for the well wishing.

 

[Autorotate]

Re: Rem 700P MLR 338 Lapua take off stock with bottom metal pillar bedded by RBros Ri

Bump

gun)

 

[Grant A]

Re: Rem 700P MLR 338 Lapua take off stock with bottom metal pillar bedded by RBros Ri

Just to avoid a sour deal for you, you should measure inside that mag. I have 3.775 300wm mags that fit the same bottom metal. The inside length is about 3.704
3.775 is the outside
good luck with the sale, this is a sweet deal guys and in case someone is wondering you can easily buy 3.775 magazines for 300wm also (and those can be bent down for smaller cartridges like 30-06)

 

[Autorotate]

Re: Rem 700P MLR 338 Lapua take off stock with bottom metal pillar bedded by RBros Ri

SPF to bullridety

 

[Autorotate]

Re: Rem 700P MLR 338 Lapua take off stock with bottom metal pillar bedded by RBros Ri

Back up for sale

$400 shipped

 

[mleeber]

Re: Rem 700P MLR 338 Lapua take off stock with bottom metal pillar bedded by RBros Ri

$$$ on the way. Thanks!