Need space so these are available.
All are plus shipping by method of your choosing. USPS MO is preferred.
Early Herter's massive C press with priming arm. Has a brazed repair of on side of the lower handle link. Works fine as I have sized everything possible on it and it works fine. Takes Herter's, non-screw in, shell holders $50
Another massive Herter's C press with priming arm. Takes Herter's, non-screw in, shell holders $60
CH C press with priming arm. Takes current snap-in type shell holders $50
CH Swag-O-Matic press with top punch holder die $25
Two RCBS Reloader Special 5, O frame presses $100 each
Lee (cough) 50 BMG press with solid shaft replacement handle. $100
Herter's Model 81 Twin Ram press. Perfect for loading bottleneck rifle ammo. $100
RCBS Rockchucker with auto primer feed, tubes and priming arm. $130
Another RCBS Rockchucker with auto primer feed, NO tubes but has the priming arm $125
CH Auto-Champ MK IV progressive press in 357 Mag $325
Comes fully set up and adjusted. Bushing chart, extra case feed tube included. Needs a blast tube ( simple length of pipe to surround the primer feed tube) unless you are the brave type. Will not work with CCI primers as they have uneven primer anvil heights. Anything else and they are slick operating machines. CH still makes bushings for the powder measure.
MEC 600 JR. in 20 ga. has the fully adjustable charge bar. $100
All are plus shipping by method of your choosing. USPS MO is preferred.
Early Herter's massive C press with priming arm. Has a brazed repair of on side of the lower handle link. Works fine as I have sized everything possible on it and it works fine. Takes Herter's, non-screw in, shell holders $50
Another massive Herter's C press with priming arm. Takes Herter's, non-screw in, shell holders $60
CH C press with priming arm. Takes current snap-in type shell holders $50
CH Swag-O-Matic press with top punch holder die $25
Two RCBS Reloader Special 5, O frame presses $100 each
Lee (cough) 50 BMG press with solid shaft replacement handle. $100
Herter's Model 81 Twin Ram press. Perfect for loading bottleneck rifle ammo. $100
RCBS Rockchucker with auto primer feed, tubes and priming arm. $130
Another RCBS Rockchucker with auto primer feed, NO tubes but has the priming arm $125
CH Auto-Champ MK IV progressive press in 357 Mag $325
Comes fully set up and adjusted. Bushing chart, extra case feed tube included. Needs a blast tube ( simple length of pipe to surround the primer feed tube) unless you are the brave type. Will not work with CCI primers as they have uneven primer anvil heights. Anything else and they are slick operating machines. CH still makes bushings for the powder measure.
MEC 600 JR. in 20 ga. has the fully adjustable charge bar. $100
