Cackas2
Well-Known Member
- Joined
- Sep 3, 2014
- Messages
- 55
Could someone with Quick Load help me out? I have a 28 Nosler throated long for the 195 bergers. I'm getting pressure signs on close to listed max loads. I wonder if it is actually too little powder with this throat configuration, O.A.L at the lands is 3.745. I tried RL 33 with great velocity but the accuracy isn't there. I tried Retumbo and have great accuracy at 79-80grs but bolt lift is slightly stiff, also has residual powder on the neck and part of shoulder. No noticeable primer flattening and the dimensions at the base are the same. All brass has been fired and full length sized to bump the should .002 any help is appreciated!
