For Sale Pierce Shadow Carbonsix 308 Win B/A

[Bigwilly556]

Full disclosure. I'm selling for a friend who wasn't happy with it's performance and is changing to a shorter setup for suppressor use.

-Pierce shadow nitride RH short action 308 BF.
-20 MOA Pierce rail.
-Carbonsix 20 inch sendero 5/8x24.
-308 win .122 FB reamer.
-Cera-kote to match action.

This was entirely built by Pierce. Has approximately 300 rounds on it. He was using 178 ELDs and Pierce test fired with 168 SMKs. See build sheet and group pictures. He also has once fired Lapua brass fired in this chamber he may sell with the B/A.$2150 OBO shipped.

Trades MDT Hnt26 Rem short R/H cobalt.

2 3 shot groups.

5 shot group.

Thanks
Andy

 

[Bigwilly556]

Bump

 

[sable tireur]

So the extra $561 is for the Carbon Six barrel you (he) supplied?

 

[Bigwilly556]

He did supply the barrel to Pierce. I don't recall what he paid I'd have to ask. The Pierce rail I believe was an additional $100 and isn't on the invoice. I very much dislike being the middle man.

 

[Shane Lindsey]

I have a 20" C6 barreled action in 308 as well.

Groups like this one does. Three pretty good, anymore and they start to open up. This one would make a woods nice hunter. Shortys are handy...GLWS/middleman

 

[sable tireur]

He did did supply the barrel to Pierce. I don't recall what he paid I'd have to ask. The Pierce rail I believe was an additional $100 and isn't on the invoice. I very much dislike being the middle man.

Understood.

 

[Bigwilly556]

Bump

 

[Bigwilly556]

Bump

 

[Bigwilly556]

Lowered $2050 shipped.

 

[Bigwilly556]

Bump

 

[Bigwilly556]

Bump

 

[Bullmark]

Pardon my ignorance but is the Pierce action considered a Rem 700 footprint or clone??
I have a chassis that's been sitting around for years and I need a Rem 700 short action or a clone to plug and play.
It would be typical of me to buy a barreled action and have it be the wrong fit.
Thanks for the info and what a nice guy you are for helping out a friend. Remember, no good deed goes unpunished….lol.

 

[Bigwilly556]

It is a Remington 700 footprint clone action. Takes Remington 700 triggers also. It will fit in any Rem short action chassis or stock (with possible minor fitting). He had it in my borrowed MDT Hnt26 and I've mocked it up in a manner EH1 for an zermatt origin. Both fit perfectly.

Thanks
Andy