Then I will probably wait for your review before I grab one. Not like I can get to testing it anytime soon anyways.
MK Machine makes an adapter but not sure if it would work for youAre there any off-barrel mounts for the MagnetoSpeed V3 for a laminated wood stock?
Here's one of my long range rifles - Ruger action, Preferred Barrels s/s 26", Boyd's Spike Camp stock, Harris bipod.
View attachment 418547
I have this adapter mounted on my 300WM Hogue rubber stock (soft rubber is probably the worst scenario for this adapter) and it works very well with the Wiser Mount. I was concerned that being rubber I would not get it tight enough to not move. Not a problem, the above adapter has 2 jam screws on the bottom that push a flat bar against the rubber stock pinching the sling stud super tight. It should work very well on your stiffer wood stock. I move mine from my Hogue tapered stock to a straight MDT ACC chassis, to my buddy's stocks without any problems once I bought the Wiser Pro upgrade. The only thing I can think that could possibly cause you a problem using this Pic adapter is pulling the sling stud out of your stock if it is not anchored well into metal and only screwed into your soft wooden stock.If the stock had a pic rail I wouldn't be making this post.
This may be the answer ...
View attachment 420472