New .375 Cheytac looking for load data....

[drathaar907]

1/9 twist, 35 inch barrel. Currently have 8 lbs of H50 powder and some 350 and 377 grain CE Lazers, Peterson Brass, Federal 215M primers. Looking for some comparable... or resources to begin the loading process. Any input appreciate.

 

[simo hayha]

K&P barrel?

 

[drathaar907]

K&P barrel?

Yes

 

[simo hayha]

390 grain Hornady A-Tip load development 375 Cheytac

I loaded up 5 each of 124 126 and 128 grains of vv n570 in junk Jamison grass; got 2925, 2975ish and 3015 fps with those all with SD less than 7; accuracy was kind of all over the place in a 1-10 twist Lilja barrel, 35"; pockets were loose to start with, starting to get ejector swipes at the 128...

www.snipershide.com

 

[simo hayha]

Not the same info. You have to dig around with the cheytac

 

[just_jon]

Here is what QL generated.

 

[drathaar907]

Yes

How did you know K&P barrel???

 

[drathaar907]

K&P barrel?

How did you know?

 

[drathaar907]

Here is what QL generated.

Much appreciated!! Thanks! Where does one get this program?

 

[just_jon]

QuickLoad Ballistic Prediction Software | Neconos.com

www.neconos.com

 

[gafferq2xl]

Run the 377gr in a 1-9.
In my experience with 6 lots of H50 charge weights varied from 138.5-142.5gr with one caveat, 40" K&P.
A 400 Lazer is your best bullet for the 375 CT in my experience and a 1-8 spin, best results beyond supersonic. Again, this is with a 40" K&P and with 138.5gr H50.