Need HIGH END ballistics software

RandyinVa

Well-Known Member
Joined
Mar 31, 2007
Messages
225
Location
Hatteras, NC
I have tried this before. I need software to replace TIOGA which is a DOS only solution and was not upgraded.

My requirements are for the ability to PRINT out ballistics to 1500 or greater yards, for every 5 yard increment. I also need clicks to take .225 or whatever, not just the standard 1/8. 1/2, etc. I need it to take actual mounting distance from bore to center of scope and take whatever BC I need to work to MY trajectory. It would, of course, take elevation and temperature.

Please read CAREFULLY and let me know if anyone meets it.
If not I may never be able to leave the DOS world for this need.
 
The Nightforce Exball is the program that I use and I believe it is also used by several others on this board it will give drops to over 3000 yards and gives corrections in MOA,IPHY,MPHY,CPHY
Check here;
thumb.gif

http://www.nightforceoptics.com/?catid=3&viewitem=153
 
Warning! This thread is more than 18 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top