• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

King Custom Arms 7mm-300 win mag

Timnterra

Well-Known Member
Joined
Oct 18, 2012
Messages
1,821
Location
Rapid City SD
This is a 7mm-300 win mag improved with a 35 degree shoulder. It is built on a blueprinted Remington 700 action with opened loading and ejection port, fluted bolt, upgrade Gretan firing pin assembly, PTG recoil lug, 40x trigger, stainless, Sunny Hill bottom metal, Shilen 1-8" twist #5 barrel with muzzle brake. The stock is a McMillan HTG bedded by Lingrifles Inc. The barreled action is Cerakote Elite Smoke grey. The rifle comes with a set of custom died from Lee and a custom set of dies from Widden. There is just over 100 rounds through it, mostly fireforming loads and a little lid development. Will include the log book and fireformed brass. The scope is a Ziess V4 6-24 with illuminated MOA reticle. This rifle has been just sitting in the safe for a few years and never gets used so it's time to go. I was getting 3100 fps with the 180gr eldm bullets without any pressure. This should be a fantastic long range combination. I have a box of 195 EOL Berger bullets I was going to try but never got around to it. I'll include those with the rifle. For just the rifle and bullets and dies $2,500 shipped for the scope I'll do $3,300 shipped. The picture of the rounds is before (on left) and after fireforming (on right).
 

Attachments

  • 128789EC-BF5C-4240-8F82-3DBDB8D6C72D.jpeg
    128789EC-BF5C-4240-8F82-3DBDB8D6C72D.jpeg
    2.7 MB · Views: 217
  • 7EB6BB9D-759B-47FD-87A3-0E090DB6BEAE.jpeg
    7EB6BB9D-759B-47FD-87A3-0E090DB6BEAE.jpeg
    1.2 MB · Views: 196
  • AD6FBAFC-C6F2-48C4-A881-A8401C6B2603.jpeg
    AD6FBAFC-C6F2-48C4-A881-A8401C6B2603.jpeg
    1.5 MB · Views: 179
  • image.jpg
    image.jpg
    861 KB · Views: 180
  • image.jpg
    image.jpg
    1.5 MB · Views: 196
  • BD4980C6-678B-49C1-B204-EA8B973FF8BB.jpeg
    BD4980C6-678B-49C1-B204-EA8B973FF8BB.jpeg
    1 MB · Views: 210
Last edited:
Can you fit loaded round in mag at FL, or do you need to seat them short?
There is still room in the mag to mag feed them if you seat a 180eldm touching the lands. I haven't loaded any 195's to see but I think they would fit too if not it would be very close.
 
Top