SOLD/EXPIRED HS Precision DBM Long Action

[aroshtr]

I have a never used HS Precision DBM with an extra magazine I can not use. It has the 300 Win Mag magazines which will work with a variety of cartridges. I originally bought this thinking it would work with the 338 Norma Mag, but it will not. The RUM cases work just fine however.

This is a drop in fit for most BDL stocks, and comes with instructions.

I am only asking $280 for the entire package which includes priority mail shipping.

Let me know if you have any questions.

You can email me at [email protected], or send me a PM on this forum.

20150201_201737.jpg

 

[fordracer]

Is this flush fitting bottom metal? Does the photo have a mag inserted in the bottom metal. Would a 6.5-06 cartridge work in these mags? I know the 300 Mag has the belt around the bottom.
Thanks,
John

I have a never used HS Precision DBM with an extra magazine I can not use. It has the 300 Win Mag magazines which will work with a variety of cartridges. I originally bought this thinking it would work with the 338 Norma Mag, but it will not. The RUM cases work just fine however.

This is a drop in fit for most BDL stocks, and comes with instructions.

I am only asking $280 for the entire package which includes priority mail shipping.

Let me know if you have any questions.

You can email me at [email protected], or send me a PM on this forum.

20150201_201737.jpg

 

[aroshtr]

These are not a flush fit. The magazine is fully inserted in the picture and extends a couple inches past the bottom metal.

This would work with the standard diameter cases like the 06', but the feed lips would need to be bent in slightly. The case would likely ride too high, and may apply too much force to the bolt, or not feed quite right. Once the feed lips were bent in so the case extended the proper amount it would work just fine.

In these pictures I have a belted mag, and a 06' size case inserted. It would not take much bending of the feed lips to get the smaller case to sit properly in the magazine.