Hornady reloading presses

[BillyGoatGruff]

Question about hornady progressive presses.
I have a standard lock n load press.
My buddy has a hornady lock n load ammo plant. Will the dies set up in my press go right into the ammo plant and produce the same ammo? This is fir 223. I'm basically wanting to mass produce my load in his progressive

Thanks,

 

[PddPdd]

You or he will need the correct shellplate for the LnL for the caliber you are reloading, and the dies will need to be re-adjusted, but they should work.

 

[BillyGoatGruff]

Ok

You or he will need the correct shellplate for the LnL for the caliber you are reloading, and the dies will need to be re-adjusted, but they should work.

Okay thanks. It was the readjusting of the dies I was hoping to avoid.

 

[BillyGoatGruff]

Both presses use the same lock n load bushings.

 

[can1010]

it's not the bushings it is the stroke of the ram that is different. look for a cheap set of dies and set them up for his press, lee dies or even used dies are good for making blaster ammo on a progressive and save your dies to make quality ammo on your press.