Has any one used these timing washers

[Darryle]

I have a 223 Wylde build with a 3 groove barrel. I don't want to use a crush washer or peel shim for fear of getting it out of alignment and the possibility of a baffle strike.

I am literally less than .006" out of time, the muzzle device is nitrided, so I really don't want to attempt to sand it in, if the device was stainless, I would not be asking this.

Accu-Washer Muzzle Device Alignment System

Thanks in advance.

 

[marc357]

I used similar washers that came with 2 Silencerco ASR Brakes, worked fine on both rifles. Once I got em dialed in I used red loctite on the brake threads and neither has moved in 5 years.

 

[Mike D Texas]

I've used them. Make sure to torque them well. I don't know what that number should be…..

 

[FEENIX]

I have a 223 Wylde build with a 3 groove barrel. I don't want to use a crush washer or peel shim for fear of getting it out of alignment and the possibility of a baffle strike.

I am literally less than .006" out of time, the muzzle device is nitrided, so I really don't want to attempt to sand it in, if the device was stainless, I would not be asking this.

Accu-Washer Muzzle Device Alignment System

Thanks in advance.

I have used crushed washers ...
https://mechforce-usa.com/mechforce-variable-timing-crush-washers-for-muzzle-device-alignment/

 

[Darryle]

I have used crushed washers ...
https://mechforce-usa.com/mechforce-variable-timing-crush-washers-for-muzzle-device-alignment/

I never knew those existed, thank you sir!

Thanks everyone for the responses, I ordered the timing washers and the variable crush washers.