Hart Case Saver?

tbrice23

Well-Known Member
Joined
Dec 12, 2012
Messages
3,076
Location
Indiana
I have read a lot of mixed reviews on the Hart Case Saver. Does anyone have any recent experiences with it.
From what I understand the mandel isn't hardened at all. Im wondering if it would be advisable it try to harden it before its beaten out of shape?
 
I recently bought one of these. After reading all the horror stories of people beating them into oblivion with no "saved cases" it prompted me to call RW Hart and ask some questions prior to using mine.

What they told me was that brass being a soft material should not need excessive force to swage back into a usable shape to hold the primer. He told me that a leather or rubber mallet with about 5-10# of striking force is all that should be required to bring the pocket back to a usable shape and if more is required then the brass is likely too hard and should be junked.

So here is what I did, I used the swage in the manner recommended. If it worked as recommended fine, if not I went out to the shop and found a roll pin punch that matches the diameter of the swage so a little more persuasion could be applied to the brass. The only differance is the roll pin punch doesnt have the alignment pin that goes down the mandrel so you have to be careful to keep the punch square to the brass.

So far i have been able to save several pcs. of brass between the two methods described. If my brass that I bought this tool for wasnt running around 4.00 ea before i monkey with it I would be more apt to throw it away. But as costs go up it makes it more worth the while to try and save as many as possible.


Hope this information is useful. Regards, Brian.
 
I have a homemade SS mandrel and bar that kind of works but im not really happy with my set up.
Are all components of the Hart tool made of carbon steel?
 
Last edited:
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top