-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
GAP 6.5 4S Brass Specs
- Thread starter 8andbait
- Start date
Help Support Long Range Hunting Forum
Re: GAP 6.5 4S Brass available
I got my brass today.
Out of 250 I weighed
1-213-213.9
57-214-214.9
113-215-215.9
55-216-216.9
12-217-217.9
10-218-218.9
2-219-219.9
Only 25 that were out of a 2.9 grain window from 214-216.9
Shoulders are 1.628. my chamber is 1.631 after firing the Rem brass, I push them back to 1.629 when resizing.
OAL of brass was between 2.015 and 2.021, I only measured 25 of them
Loaded rounds measured .291-.2915 at the neck, my rem brass that I neck turned to .0145 was .293 when loaded so these have a slightly thinner neck.
I didn't find any tags in the flash holes but a few were rougher than others.
All primers seated to .003-.005 depth
Overall the quality seems pretty consistent.
I got my brass today.
Out of 250 I weighed
1-213-213.9
57-214-214.9
113-215-215.9
55-216-216.9
12-217-217.9
10-218-218.9
2-219-219.9
Only 25 that were out of a 2.9 grain window from 214-216.9
Shoulders are 1.628. my chamber is 1.631 after firing the Rem brass, I push them back to 1.629 when resizing.
OAL of brass was between 2.015 and 2.021, I only measured 25 of them
Loaded rounds measured .291-.2915 at the neck, my rem brass that I neck turned to .0145 was .293 when loaded so these have a slightly thinner neck.
I didn't find any tags in the flash holes but a few were rougher than others.
All primers seated to .003-.005 depth
Overall the quality seems pretty consistent.
