SOLD/EXPIRED FS Sendero SFII take off stock

[Iclimb]

HS precision stock that I took off my sendero SFII. The Remington pad was removed and a limbsaver recoil pad installed. LOP is aprox 13". There is one little chip where the pad meets the stock. Its really not noticeable with the color of everything. A little dab of silicon may make it disappear, the pics look worse than it is. The "tip" of the groove, where the bolt sits, chipped off and was repaired using devcon, it is solid (shown in pics).
It has been skim bedded and I've fit two other sendero barreled actions in it so it seems to be good for a factory setup. Its not a lot of bedding and would be easily removed if one was so inclined. Removed a few high spots to float the barrel.

Thats it. It really is in good condition and the limbsaver pad really makes a big difference over the factory pad.
I can email more pics of anything if you just let me know. I'd like to get $250 out of it.

 

[Iclimb]

couple more pics

 

[Iclimb]

I'll throw the sling studs back in it too.

 

[Iclimb]

I will remove the bedding if thats what the buyer wants. It was only skim bedded.

 

[Iclimb]

Lets Try $200

 

[BigSwede]

Long action?

 

[Iclimb]

Yeah Long action.
I REMOVED THE BEDDING THAT WAS IN IT. SO IT IS BACK TO A CLEAN ALUMINUM BEDDING BLOCK. THE LUG POCKET IS STILL BEDDED IN.
It fits all my LA Remington actions and IMO having the lug pocket tight is better. I will remove that too if the buyer wants. I have new pics of everything cleaned up so if you're interested I can email them.

Originally I bedded in the front of the action and the tang so nothing was ever changed on the sides...

 

[fssticka]

PM sent.

 

[Iclimb]

SPF