• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED FS Savage 10 Stagger Feed Small Shank Trued Receiver .308 bolt face w/ accessories

Status
Not open for further replies.

bapayton

Well-Known Member
Joined
May 14, 2012
Messages
129
Location
Fort Worth, Tx
Hello everyone!

Up for sale is a Savage Model 10 Stagger feed flat back receiver (4.27" action screw spacing) that has had both the front receiver ring and internal locking lugs trued. They were trued in a lathe using a Manson Precision ground mandrel and bushings through the raceway. Runout on the mandrel was brought down to approx .0002" and then cuts were made with a boring bar. The receiver face ruout even before machining was approx .002" which I thought was pretty good for a factory receiver. After the receiver face was trued I used PTG carbide tooling to true the bolt face. I darkened the face-on picture of the receiver so it would be easier to see the shiny truing cuts.

I initially bought the receiver to use as a project but I have enough irons in the fire so I'm selling it off. I've already sold the stock and barrel, the receiver is all that's left. I bet the receiver doesn't have 50 rounds at most through it. There was almost zero bolt face wear before I trued it up and there is also very little bluing wear through the raceway. It's not perfect but it is in really good condition! I think it mostly set in someone's closet.

Price $350 shipped and insured to your FFL. Might also be willing to trade for Remington 700 (600, 721, 722, Sportsman 78) style bolt action receiver.

Everything you see is included:
Model 10 reciever w/ .308 bolt- trued
-mag box w/ follower & spring
-barrel nut- faced using an expanding mandrel, you can see the shine where the bluing was removed
-factory recoil lug
-lapped Remington recoil lug- I don't like the Savage factory lugs and usually use a lapped Remington when I don't have an aftermarket lug handy
-2 screw trigger- includes factory .055" wire and a replacement .039" wire. Trigger pull has not been set or measured. I could always swap the 2 screw for a 3 screw if someone was interested.
-action screws
-2 piece scope mounts

I think I have feedback here but I can also give you my ebay seller info and accurateshooter.com info if you want to check my selling/buying history.

If you have question or need more/better pictures please let me know!
 

Attachments

  • DSCN3191.JPG
    DSCN3191.JPG
    49.1 KB · Views: 23
  • DSCN3192.JPG
    DSCN3192.JPG
    49.2 KB · Views: 25
  • DSCN3193.JPG
    DSCN3193.JPG
    63.8 KB · Views: 21
If I understand correctly, you trued the action face and locking lugs in a setup based on the alignment of the bolt raceway?

What fixture was used to true the face of the bolt head?
 
Status
Not open for further replies.
Top