youngtrout
Well-Known Member
- Joined
- Jan 4, 2006
- Messages
- 256
Hello
I have a 7 Saum barrel for sale. It was taken off a stiller predator so should be good to go on a 700. Had a .25 lug
Specs
1:9 twist
26 inches long
6 contour fluted. Weight 3.5 pounds
.764 at muzzle
About 150 rounds down tube
This barrel has printed many sub moa groups. My issue with the barrel is early pressure signs. Was having high pressure at medium charges. The chamber is throated for 180 bergers. What I determined was max for the rifle was 57.5 grains of h4831sc
Just letting potential buyers aware of everything I know. Just had a 300wm build so I'm looking for something different too. Benchmark did all the work on this barrel.
I think it would be a perfect barrel to be re cut and set back or re chambered to a wsm etc.
250 shipped. Let me know if you have questions
I have a 7 Saum barrel for sale. It was taken off a stiller predator so should be good to go on a 700. Had a .25 lug
Specs
1:9 twist
26 inches long
6 contour fluted. Weight 3.5 pounds
.764 at muzzle
About 150 rounds down tube
This barrel has printed many sub moa groups. My issue with the barrel is early pressure signs. Was having high pressure at medium charges. The chamber is throated for 180 bergers. What I determined was max for the rifle was 57.5 grains of h4831sc
Just letting potential buyers aware of everything I know. Just had a 300wm build so I'm looking for something different too. Benchmark did all the work on this barrel.
I think it would be a perfect barrel to be re cut and set back or re chambered to a wsm etc.
250 shipped. Let me know if you have questions
