Finding your lands and sizing brass (video)

[Alex Wheeler]

It was suggested to me that I should post a link to a video I made about finding the lands in your rifle. Its proven very accurate for us in long range Benchrest and F class. I will link one I did on sizing cases as well. There are some others that I have done that may or may not be of interest to you as well.

 

[dok7mm]

Thanks, Alex. It's great to have you on board. Maybe Len will make your videos a "sticky".

 

[coop2564]

Thanks

 

[Alex Wheeler]

One thing I should have mentioned in the video is to use a dummy case with little to no runout. A case with runout at the bullet ogive will drag in the freebore and make life hard.

 

[can1010]

seen your videos a while back think it was youtube. great info and use it to this day.

 

[Barrelnut]

Yea, good stuff. I have used the vids for a few years now too. Others have posted links to them ever now and then

I like the idea of making them "stickys".

 

[newmexkid]

I started using you, 'method' for finding the lands/sizing about 6 months ago. Sure made life much, much easier. Not to knock down a product but, my Hornady COAL tool was way off...For me.

 

[Pharmseller]

Tag for later



P

 

[N2TRKYS]

I use a my cleaning rod to find the lands.

 

[Scratch]

Alex
When your resizing the brass for your chamber, do you trim before or after you find the sweet spot?

THX
Scratch

 

[Don A Parsons]

X's 2 tag.

Can't wait too see the happenings

Don