• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED Darrell Holland 22-250 HS / 700 / Kreiger $900

elkregulator

Well-Known Member
Joined
Jul 5, 2007
Messages
319
Location
Parker, CO
Darrell Holland 22-250 HS / 700 / Kreiger $850

Holland 22-250
Base was Remington 700 VSSF
HS precision stock with custom camo
Darrell Holland lapped bolt lugs and installed barrel
Kreiger 26" #8 contour (1" all the way to the muzzle) 1 in 12" twist.
Holland Trigger job
This barrel has no more than 500 rounds through it and was never over heated.
It will shoot as good as you can drive. ½ moa 5 shot groups common, Serious tack-driver.
Also included will be a set of RCBS dies and a Forster Ultra Bullet Seater die.
Load data will be included
Bedded into the stock
Around 80 rounds of new brass included
Stock has been filled with lead to balance barrel
Slight right hand palm swell added
Textured grip and forearm
Please email with additional questions.
Free shipping/insurance CONUS, AK and HI actual cost,
Ship to FFL only
No shipping outside US
Certified Funds Only Please.
Thanks for looking!
-Bipod not included
$850

Email preferred: [email protected]
Listed on other forums.
CIMG3295.jpg

CIMG3292-1.jpg

CIMG3289-1.jpg
 
Last edited:
Holland trued the action with the barrel install. I believe this is the full blueprint.

yes, pre x mark tuned trigger
 
Still for sale? How does it balance? How long is the barrel? Did the stock color come from HS What sort of scope were you using on it to get the 1/2 groups? Have you shot factory loads with good results?

Thanks
 
Forgot to ask. Is it pillar bedded to the stock, glues or just skim coated. I was wondering if I cut the barrel down to 20" if it would still ballance well
 
Still for sale? How does it balance? How long is the barrel? Did the stock color come from HS What sort of scope were you using on it to get the 1/2 groups? Have you shot factory loads with good results?

Thanks


Yes, it is still for sale.

It balances about 1.5" in forward of the front screw.

26" barrel

Stock was painted by me

scope leupold vx-3 6.5-20

I have not shot factory loads in this.

Thanks for looking
 
Forgot to ask. Is it pillar bedded to the stock, glues or just skim coated. I was wondering if I cut the barrel down to 20" if it would still ballance well

It has been skim bedded to the HS full length aluminum bedding block.

It would probably still balance well at 20".
 

Recent Posts

Top