• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Converting Rem 700 long action

jocraig

New Member
Joined
Jan 28, 2016
Messages
1
Hi I have a Rem 700 CDL in 30-06 and would like to change the barrel to a 26" and re chamber to 7mm Rem Ultra Mag my question is will this round fit the action or is there a better long distance do it all hunting caliber
Many Thanks
 
Easiest - try to exchange your action/bolt for an ultra mag action and bolt. Too costly otherwise IMO.
 
I like the converted or PTG bolt with the M-16 extractor a lot better than the factory extractor. It's a common job. We get a better than factory fit on the head of the case. I like to use an M-16 extractor after opening the bolt then alter the feed rails with a diamond home by hand. This gives us super dependable extraction without the danger of a Sako style blowing into your eye if anything goes wrong.

With the 195 Berger it is very potent and being 7mm has a huge choice of bullets for about any occasion.
 
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top