SOLD/EXPIRED Carbon Six Savage Small Shank .284 Win Barrel

[.300 Dakota]

Never torqued on an action. Did verify threads would fit Savage action. This is a Sendero contour 1:9 twist prefit for Savage small shank. Should install on an Origin action, also. Price is $500 plus $25 shipping TYD. Decided to build a 7 PRC, which is now completed. Will accept Postal money order or cashier's/certified check only. Will be packaged securely. Thanks!

 

[Roughrice]

PM sent.

 

[.300 Dakota]

PM sent.

Sorry, working out of town. I attached a copy of the reamer print from Manson that C6 used to chamber. I'll share it here, as well.

Someone else asked about the weight and whether it had cartridge designation stamped on. I will get a weight when I get home late tonight. It is heavier than Proof, I can tell you now. Along the lines of a Bartlein CF, I'd say. There is not a chambering stamp on the chamber end nor on the sides.

Pure Precision makes a stock for Savage that you can get to fit that with a little elbow grease and dowel. Carbon Six told me today they do lots of business with Pure, believed you could likely get pure to inlet one to exact spec. That was certainly true when they were Mesa, because I have 2 they did exactly that with.

 

[Roughrice]

Ok. Thank you.

 

[.300 Dakota]

Weight 3lbs, 3ozs. Somebody asked about diameter ahead of threads and which nut. It's a small shank Savage thread and it's straight until you hit the carbon fiber. Any Savage small shank nut will work. Threads 1.055"x20p, so shank diameter 1.055".