.300 Dakota

Not for your current repertoire, BUT RL17 and the Hornady 103gr ELD-X hunting bullets were a match made in Heaven in my factory 26" 7.5...

MRP was by far the best for me. Won't find that on a site anywhere for data. But good luck finding MRP. StaBall 6.5 gave great speed and...

My 25prc loads are both in the 57 and 57.5 range

Both H1000 and H4831SC work well. Just don't expect a close to maximum load at 60 degrees to be good at +90. Gonna get some clickers and...

Hahaha!! Actually H1000 was super mild on the throat!!

Unknown Munitions making the barrel. Jake and Blaine are both keepers!

I'll start with this .130 and go shoot 100 rounds, then it'll be .200.🤣

Oops … you are OP, sorry ! I too will be interested in others FB. I ve got a 6-280AI and only has .050 FB …. I think .125-.150 would be...

Not sure I could get away with that speed on 90s with a 7.5 twist, but well-constructed 100s should be fun.

Just a Redding full length neck bushing die will work. I’ve necked down Lapua and I’ve necked down Peterson. I ran .273 first firing to...

I had one with .130 freebore and my current one is .200 freebore. No experience with magnum primers unfortunately

How much freebore are you running with your reamer? Any experience with magnum primers with any of those powders? Obviously the charge...

I have necked down 6.5prc ADG and Lapua brass to 25prc and 6prc. No issues with Redding dies/bushings. For the 6mm I tried it both ways...

I use an SAC PRC die and neck down in one shot with a .271 bushing on lapua brass. Their bushing is a neck/shoulder bushing though and I...

Not a .300 Win Mag, but it works GREAT in a .250 MDC wildcat (.25/.264 Win Mag with .250" freebore). Started at 68 grains and working up.