Bullet seating

[WildRose]

So I was decided I was going to try some 190gr berger in my 300RUM. When I loaded the 1st bullet, I got this mark on the bullet. Using a RCBS seater, no modifications. Any quick fixes or don't worry about it?

You need to get the VLD seating stem.

 

[milboltnut]

I'm the same way , I could tear up a crowbar ,in a pile of sand.

a steel wedge with a wooden hammer

 

[cornshank]

a steel wedge with a wooden hammer

 

[sheepdog1mt]

I started loading 6.5 156 Bergers in new add brass and got the same ring with .004 tension. I ran a .262 expander/ mandrel through them so .002 tension and ring went away. I ordered the Redding vld stem seater anyway.

 

[sheepdog1mt]

ADG brass, correction