Best Powder for a hornet?

[haeffkr]

1680 is what I have... anything else folks like?

 

[Ckgworks]

I mostly use Lilgun now.....I ended up with a lot of it and stopped playing with other powders in mine

 

[Thunder17]

Been using CFE BLK in my .17 and it shoots well

 

[haeffkr]

CFE BLK

thanks for the tips on the lil gun and CFE BLK

Never heard of this powder for a hornet - https://www.powdervalleyinc.com/product/hodgdon-cfe-blk/
I will see if my local shop has it.

thanks haeffnkr

 

[Bret GRAVELINE Graveline]

Win 296 or H110 I only shoot 35 and 40 gr bullets out of the hornet, while lilgun offers great accuracy it almost 150 fps slower than 296/h110 out of a 21 inch barrel

 

[haeffkr]

Win 296 or H110 I only shoot 35 and 40 gr bullets out of the hornet, while lilgun offers great accuracy it almost 150 fps slower than 296/h110 out of a 21 inch barrel

What is the most accurate powder?

 

[Bret GRAVELINE Graveline]

What is the most accurate powder?

In my rifle a CZ its the 296/H110, these two powders originally were two completely different powders by different companies, however I have it on good authority they are now both the same, hodgdon is now the producer and has been for some years now of Winchester brand powder, 12 grs gives a little over 3100 Fps with 34 or a 35 gr bullet I tried 5 or 6 different powders, Lilgun and 296 produced 5 shot 3/4 inch groups,

 

[kiwikid]

Although Lilgun gave me good velocity it didn't produce great accuracy. With 10.5 grains of Win 296 in RWS brass, Fed 205 GM primers and Sierra 40 grain Hornet Varminter bullets my Weihrauch 22 Hornet achieved 2808 fps. The accuracy was a lot better than Lilgun. The photo is a five shot group at 100 m

 

[Ckgworks]

Primers can make a big difference in accuracy with certain powders in the Hornet. I can't remember velocity on my Lilgun load, but I do know I switched to Rem. 6-1/2 primers to get better accuracy.... just over 1/2" groups in a Ruger bolt. I think the Hornet can be a tricky bugger to load for but once you find the sweet spot in your gun, you'll know it. I also have a 22 hornet Contender that shoots absolutely great with 1680, but will shoot my Ruger load into 3".....same is true in reverse. I'm switching the Contender to K-Hornet so I haven't played with it much.