Like the title says, trued Rem 700 w/ 22" Benchmark 1:9 twist 7mm Rem Mag barreled action. Has LRI M16 style extractor installed, oversized bolt handle, 20 MOA pic rail and comes with a Trigger Tech Primary trigger. Threaded 5/8x24. All gunsmithing (other than LRI extractor) done by Benchmark. Barrel is 1.25" for 3" and then a straight taper to 0.85. Has a 0.25" recoil lug. There's a scuff on the top of the recoil lug because when I went to remove a picatinny rail (to cut it down to fit in a chassis) the anterior screw was seized, and when I cut the rail apart to get it off I dinged the top of the recoil lug with a dremel. I've since replaced the rail. I'm not sure of the exact round count but it's less than 300. Shoots 2" groups at 500 w/ 168gr Bergers in front of 69gr Retumbo @3024fps (running a 6" can).
$900/shipped.
Feel free to make me a reasonable offer.
I also have a couple hundred pieces of brass and dies that I could include for the right deal.
$900/shipped.
Feel free to make me a reasonable offer.
I also have a couple hundred pieces of brass and dies that I could include for the right deal.
Last edited:
