Alamo Precision Rifles build - 7mm Rem mag - $4,000 Alamo Precision Rifles build - 7mm Rem mag - $4,000 Alamo Precision Rifles build - 7mm Rem mag

[cb4128]

I have the following rifle for sale that is not being used and needs to be put to use by someone else this fall!

It's an Alamo Precision Rifles build in 7mm Rem mag.
Defiance AnTi action, 1 piece 20 moa base, nitrided bolt
Proof Research Sendero barrel, finished at 22" and threaded 5/8x24 - 1 in 8.4 twist
Triggertech Special Trigger
AG Composites Alpine Hunter stock with edge fill
APR custom bdl bottom metal
pillar and glass bedded
cerakoted black
Round count is 63, new build last fall
Shoots 180gr Berger hybrids into small groups - .3-.4" at 100 yards (just found a decent load and went hunting 2 times with it in blind in TX)
Also shoots Barnes factory 160gr tsx and 144gr Hammer Hunter handloads into .3" groups at 100 yards
*All load data will be shared with buyer and the option to buy once fired brass, dies and new peterson brass.
roughly 6.5 lbs

Asking $3,500 face to face in the DFW area, or can ship for actual cost

 

[No Promises]

Sweet setup. Love the 22" barrel you went with. What velocity are you seeing with the 180gr Bergers?

 

[cb4128]

the load I settled on was going 2,890 fps with H1000 in Peterson brass, with only 63 rounds down the barrel - it's bound to speed up soon as well. The Hammer Hunters were going 3,175 fps with H4350 several grains off of max.

Built it for mountain hunts but also have several other options so this one is on the market.