• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

90s Jarrett 280AI load question and help

Jpterry

Well-Known Member
Joined
Feb 4, 2016
Messages
299
Hi guys - I picked up a mid 90s Jarrett 280AI from an older gentleman and he still had quite a bit ammo from Jarrett that was custom tuned and loaded for the rifle. Have a couple of questions....

1. The ammo looks fine but is over 20yrs old...thoughts on shooting it?

2. The load Jarrett worked up is not a powder im seeing many, if any, recommend using in a 280ai. He loaded up 100 rounds from 270 brass using 50.5 gr of IMR 4064, Fed 210M over Nosler Solid Base. The 4064 seems like a hot powder to use for 280ai but Jarrett did load it and recommend it. Was this just best choice back in mid 90s?

Thanks and very excited to see what this rifle will do!

Jason
 
You're good. I've shot WW2 .45 ammo and tons of Korean War 30-06....not to mention a wad of Turkish 8mm, and others. Actually 4064 is a lot slower than 4320 and others. 52gr of 4064 behind a 150gr 30-06 is the cats meow. In that 280AI you will be fine. Have a ball.
 
I guess its 22 years old now. Still should be fine. I'd sure like to see that rifle. I'm a big Kenny Jarrett fan.
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top