6prc

westcoasthunter

Well-Known Member
Joined
Aug 31, 2013
Messages
510
Reaction score
296
City & State/Province
lebanon oregon
I'm looking at building 16.5" 6PRC thinking about running the 108 eldm I was wondering if anyone had this set up. And what's your thoughts,
 
I have been considering this on an 18.5-inch barrel. I have a 20-inch barrel 6.5 PRC that runs the 144 Bergers at 2936fps.
 
Just had one finished by Manzella. 20" going to shoot 100gr TGK.. Im excited to get started on development.
 
Got my second one now, but neither is short-barreled. You may want to check this thread out on Rokslide about the 6UM - maybe more info than you care to wade through:

 
Got my second one now, but neither is short-barreled. You may want to check this thread out on Rokslide about the 6UM - maybe more info than you care to wade through:

What is your set up? And What bullet velocity
 
What is your set up? And What bullet velocity
My first was a 26" barrel and I ran 109 LR hybrids at 3350 with H1000. Near pressure, but safe. On an Impact action and was typically .375 to .625 at 100 yds. Best 5-shot at 1000 yds was about 8" - impressive ballistics at that range.

I thought about the 6UM, but this is far easier and I already had 6.5 PRC bushing dies.
 
Last edited:

Recent Posts

Back
Top