• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

6mm Rem Tikka prefit barrel with nut, gauge, and dies

  • Thread starter Deleted member 25294
  • Start date
D

Deleted member 25294

Guest
Sold
 

Attachments

  • IMG_20190412_103024105.jpg
    IMG_20190412_103024105.jpg
    721.2 KB · Views: 95
  • IMG_20190412_102927684.jpg
    IMG_20190412_102927684.jpg
    1.1 MB · Views: 79
  • IMG_20190412_103221344.jpg
    IMG_20190412_103221344.jpg
    931.6 KB · Views: 82
Last edited by a moderator:
What kind of speed were you getting with the 115's?
I never tried to push it but I got 3050 with H4350, and 3150 with RL26.
I had settled on 3000 with Retumbo because it basically shot a one hole group, and SD was super low.
RL26 was fantastic as well but I can't get any more!
 
question, I have a tx3 lite. I don't see a nut on it like my savage, what tikka models will your barrel fit? Maybe I not understanding my rifle and action..or a prefit.

thanks
 
question, I have a tx3 lite. I don't see a nut on it like my savage, what tikka models will your barrel fit? Maybe I not understanding my rifle and action..or a prefit.

thanks
It'll screw on a t3 or t3x action.
It's the same concept as a "Remage" if you're familiar with that.
The nut allows you to set the headspace yourself using the 6mm Rem headspace gauge.
If you YouTube a savage barrel swap it's the exact same process.
 
Still up, this is a super affordable setup that'll fix a slow twist .243 etc.
 
Watched a few videos on it. Found I can get long action tikka mags and looked at how to change bolt stop length. All looks pretty simple. I own a 6mm remmy in a rem 700 la with a shilen 8 twist for my long rang rig. I checked my loads oal and is way long for my tikka as it is now. Would have to make all changes, maybe not bolt stop.

Thanks for your info. I will mull it over. 6mm rem is an outstanding round.
 
Watched a few videos on it. Found I can get long action tikka mags and looked at how to change bolt stop length. All looks pretty simple. I own a 6mm remmy in a rem 700 la with a shilen 8 twist for my long rang rig. I checked my loads oal and is way long for my tikka as it is now. Would have to make all changes, maybe not bolt stop.

Thanks for your info. I will mull it over. 6mm rem is an outstanding round.
I'm turning my LA tikka into a short action comp rifle with DBM bottom metal.
I could swap you bolt stops and give you my LA mag
 
do you think I need a no-go too? Or just adjust wit the go is good enuff?
 
do you think I need a no-go too? Or just adjust wit the go is good enuff?
All you need is the go gauge, I could give you more details if you want to send me a PM with your number.
 
Top