6mm creedmoor Load help

[cb4128]

Im about to start loading up some rounds with my 6mm creed built by APR.

The following are my chosen components:

Starline brass
CCI 200 primer
Berger 105gr vld's
H4350 and RL26 powder

I don't have a modified case made yet, so hoping someone can steer me towards a good starting point for COAL.

*Ive seen 2.730" in several reloading manuals and was going to start there if I don't find any other info.

As far as h4350, I know it's extremely popular and 41-42gr is common.

Any help with personal loads or experience would be greatly appreciated!

 

[Dmagna]

I shoot 115s with 41 grains of H4350, seated to mag length. I am using Peterson brass and 210m primers. I haven't used rl26 because the h4350 shoots 1/2 inch groups. I am good with that.

 

[jebel]

My hunting load is a 101 gr Hammer Hunter over 40.1 gr H4350 in ADG brass with CCI BR-2 primers. COL is 2.822.

 

[rancher5]

I have excellent results with 87VMax Horn OAL 2.650, 3350fps flat razor out to 500 yds, BC of 4.
Excellent varmint round 500yd target shooting.
If I don't want to single feed, 108 Horn ELDM OAL 2.750 works great, 105 Bergers doesn't feed as well, IMOP

 

[jasonco]

Reloder 26...hmm...you'll probably run out of case, before you get to velocity with RL26?
I'm using 41.6-41.9 gn H4350 with 105-107 bullets and 44.0 gn of H4831sc with 110-115 bullets. 6mm Starline LRP/CCI-BR2.
With my local corrected density altitude, velocity is in the 3200's use the 110SMK.

 

[cb4128]

thanks for the input already - I'm running 46.5gr of RL26 in my 22 Creedmoor and it shoots lights out, so that's what got me thinking about running it in my 6mm.

The 41-42gr of H4350 looks to be right on par with what you guys have posted thus far too

 

[Dmagna]

I run 48 grains of rl26 in my 6.5 creed. I just liked the h4350 for the 6mm

 

[loonie]

45 grains rl 26 br2 push 115 berger vld 3130 fps in 8 twist 6 creed for my hunting load.

 

[cb4128]

loonie, great info, what barrel length are you running?

 

[loonie]

Had it set back from a Dasher so 26 inches left. 3 groove pac nor

 

[lancetkenyon]

I have two loads for my 24" 1:7.5" 6Creed.

Lapua SRP brass
Fed GM205M
42.0gr H4350
105 Hyb
3101fps

This is 9 shots. #1 Cold clean bore, 2nd shot, then 7 more in one big hole. Shot over a 45 minute span.


Lapua SRP brass
Fed GM205M
43.0gr H4350
101 Hammer Hunter
3180fps

 

[Mooseknuckles]

My load for the 6mm creedmoor rpr
Starline brass lrp
105 Berger hybrid
41.8 gr h4350
CCI200 primer
Bto 2.1870
Set neck tension to .0002 with Sinclair expanding mandrel.
Velocity 3031

 

[rancher5]

Curious
what your OAL is on the 101 Hammer bullets or better yet how far from lands.

 

[foul bore]

my load is Sierra 107 gr match king, 39.5 H4350, fed 210 primer set .015 out of lands. muzzle vel. 2887fps, a little slower but will shoot 1" groups on the right day at 500 yds