6.5 Creedmoor velocity in shorter barrels

Buttermilk

Well-Known Member
Joined
Dec 19, 2005
Messages
770
Location
Good Ol' Oklahoma
For those of you with 6.5 Creemore specialty pistols, what are you getting for velocity with 140-143-147 gr bullets with barrels in the 15”-18” length range?

Thanks
 

Buttermilk

Well-Known Member
Joined
Dec 19, 2005
Messages
770
Location
Good Ol' Oklahoma
Thanks Ernie. About what I expected.

I’ve got a 7mm-08 XP and was considering rebarrelling it to 6.5 Creedmoor.

I may very well keep it a 7mm-08. Ballistically, I’m getting 2650 FPS with 150gr ABLR bullets (StaBall 6.5 powder) and a 15” bbl, so that puts it in the same ball park out to about 600 yds.
 

Ernie

SPONSOR
Joined
Jun 18, 2007
Messages
3,936
Location
NE Wyoming
Thanks Ernie. About what I expected.

I’ve got a 7mm-08 XP and was considering rebarrelling it to 6.5 Creedmoor.

I may very well keep it a 7mm-08. Ballistically, I’m getting 2650 FPS with 150gr ABLR bullets (StaBall 6.5 powder) and a 15” bbl, so that puts it in the same ball park out to about 600 yds.
This was with factory ammunition.
 

biednick

Well-Known Member
Joined
Jun 3, 2022
Messages
139
Location
Ohio
I have a 15" 2008 in 6.5 CM. With an upper-mid range charge of StaBall 6.5 I get 2480fps using 140 grain bullets. I'm running around 43 grains. The design of the handgun I have causes it to pierce primers below book max for most high pressure cartridges, so you should be able to get more with an XP.
 

sierracharlie338

Well-Known Member
Joined
Feb 18, 2013
Messages
1,848
Location
Texas
Thanks Ernie. About what I expected.

I’ve got a 7mm-08 XP and was considering rebarrelling it to 6.5 Creedmoor.

I may very well keep it a 7mm-08. Ballistically, I’m getting 2650 FPS with 150gr ABLR bullets (StaBall 6.5 powder) and a 15” bbl, so that puts it in the same ball park out to about 600 yds.
I’d keep the 7-08 personally.
 

Buttermilk

Well-Known Member
Joined
Dec 19, 2005
Messages
770
Location
Good Ol' Oklahoma
I have a 15" 2008 in 6.5 CM. With an upper-mid range charge of StaBall 6.5 I get 2480fps using 140 grain bullets. I'm running around 43 grains. The design of the handgun I have causes it to pierce primers below book max for most high pressure cartridges, so you should be able to get more with an XP.
I’m at 49.0 gr StaBall 6.5 with 150’s.
 

biednick

Well-Known Member
Joined
Jun 3, 2022
Messages
139
Location
Ohio
I’m at 49.0 gr StaBall 6.5 with 150’s.
It's probably not worth switching. Besides the lower charge weight you won't gain much. You'll probably end up with nearly identical ballistics from a slightly lighter bullet. If you ever need to rebarrel it might be worth considering, but I wouldn't swap it just until then.
 
Top