I have sold my rifle so placing the following items up for sale. All prices would include shipping. These items are for sale on another forum so subject to prior sale. Will update list as items sell. See note at end of list on powder, primers and bullets.
Thanks
Jay
Apx 15 lbs. RE-50 – Combined 2 jugs of same lot powder into 1 jug to save shelf space - $750
3 jugs of WC-872 Milsurp pulldown powder – Apx 8+ lbs. per jug - $180 for all
692 CCI No. 35 Primers - $450
423 I blue tip incendiary Milsurp pulldowns – cleaned and resized - $320 for all
343 API silver tip armor piercing incendiary Milsurp pulldowns – cleaned and resized - $120 for all
202 Lehigh 800gr semi-bore rider match solids – included are 12 additional rounds that were collet pulled from loaded ammo so will show some loading/pulling marks - $400
100 GFL PECA 16 headstamp brass – I got this new unfired brass a while back when sold by Midway. This brass was made by RUAG for the Italian military. 75 are prepped, unprimed and ready to prime/load. 25 are primed and ready to load. - $300 for all
22 Lake City fired brass. One odd ball SPS headstamp thrown in. All of these were prepped (once fired in my rifle, annealed, resized, pockets uniformed, trimmed to 3.900", inside/outside case mouth chamfered, necks turned just enough to clean up to .021"). Ready to prime and load. - $40
30 rounds API silver tip ammunition – This ammo I hand loaded using fired in my rifle (not machine gun), Lake City brass. Looks like there is one PMJ brass in there. Primers are CCI No 35. Powder is 228gr of WC-872 pull down powder. Averaged 2880fps in my rifle. COAL varies a little but averages 5.430". Bullets used for this ammo were machine pulled so they do show some pull marks. All bullets were cleaned and resized before loading. MTM boxes are included with this ammo. - $180
30 rounds I blue tip ammunition – This ammo I hand loaded using fired in my rifle (not machine gun), Lake City brass. Primers are CCI No 35. Powder is 228gr of WC-872 pull down powder. Averaged 2880fps in my rifle. COAL varies a little but averages 5.430". Bullets used for this ammo were machine pulled so they do show some pull marks. All bullets were cleaned and resized before loading. MTM boxes are included with this ammo. - $180
RCBS AmmoMaster 2 single stage press. Includes 50 BMG shell holder, primer ram for flat and cupped 50 BMG primers, spent primer catch cup, 1-1/2"-12 to 7/8"-14 adapter, 1-1/2"-12 to 1-1/4"-12 adapter, 1-1/4"-12 to 7/8"-14 adapter, 1-3/16" wrench for removing/installing primer ram and shell holder. - $350 I have another rifle (375 SnipeTac) that uses this press so that rifle would also have to sell before I'd sell the press.
Hornady full length 2 die set #544460 with extra expander ball - $340
(5) MTM Case-Gard BMG 10 ammo boxes - $25 for all
Stalwart 25-hole wooden loading block - $10
K&M neck turning cutter and case driver - $100 Sinclair 7/8"-14 expander die with 50 Caliber (.509") stainless expander mandrel, used to expand neck for neck turning brass. The die body has been shortened to prevent the shoulder from hitting die. - $40
Hornady modified case for measuring OAL - $10
Lee .510" bullet resizer - $10
Sinclair bullet comparator - $10
Sinclair shoulder bump gauge - $10
Shooting Solutions primer pocket uniformer - $15
RCBS 1-1/2"-12 collet bullet puller with .510" collet - $190
Punch block and modified punch for removing spent primers – uses BMG shell holder to hold case (shell holder not included) - $10
Forster 50 BMG case trimmer - $80
Lyman 50BMG multi tool - $45
Hornady extra large powder funnel - $10
All brass/loaded ammo was fully prepped. Prep steps – annealed, fired in my rifle, full length resized, trimmed to 3.900", necks turned just enough to clean up to .021"), inside/outside case mouth chamfered, primer pockets uniformed, flash hole deburred.
I can't ship powder or primers. Not sure about shipping loose incendiary bullets. Would need to be local pickup.
Apx 15 lbs. RE-50 – Combined 2 jugs of same lot powder into 1 jug to save shelf space - $600
3 jugs of WC-872 Milsurp pulldown powder – Apx 8+ lbs. per jug - $180 for all
692 CCI No. 35 Primers - $450
423 I blue tip incendiary Milsurp pulldowns – cleaned and resized - $320 for all
343 API silver tip armor piercing incendiary Milsurp pulldowns – cleaned and resized - $120 for all
202 Lehigh 800gr semi-bore rider match solids – included are 12 additional rounds that were collet pulled from loaded ammo so will show some loading/pulling marks - $350
100 GFL PECA 16 headstamp brass – I got this new unfired brass a while back when sold by Midway. This brass was made by RUAG for the Italian military. 75 are prepped, unprimed and ready to prime/load. 25 are primed and ready to load. - $250 for all
22 Lake City fired brass. One odd ball SPS headstamp thrown in. All of these were prepped (once fired in my rifle, annealed, resized, pockets uniformed, trimmed to 3.900", inside/outside case mouth chamfered, necks turned just enough to clean up to .021"). Ready to prime and load. - $25
30 rounds API silver tip ammunition – This ammo I hand loaded using fired in my rifle (not machine gun), Lake City brass. Looks like there is one PMJ brass in there. Primers are CCI No 35. Powder is 228gr of WC-872 pull down powder. Averaged 2880fps in my rifle. COAL varies a little but averages 5.430". Bullets used for this ammo were machine pulled so they do show some pull marks. All bullets were cleaned and resized before loading. MTM boxes are included with this ammo. - $150
30 rounds I blue tip ammunition – This ammo I hand loaded using fired in my rifle (not machine gun), Lake City brass. Primers are CCI No 35. Powder is 228gr of WC-872 pull down powder. Averaged 2880fps in my rifle. COAL varies a little but averages 5.430". Bullets used for this ammo were machine pulled so they do show some pull marks. All bullets were cleaned and resized before loading. MTM boxes are included with this ammo. - $150
RCBS AmmoMaster 2 single stage press. Includes 50 BMG shell holder, primer ram for flat and cupped 50 BMG primers, spent primer catch cup, 1-1/2"-12 to 7/8"-14 adapter, 1-1/2"-12 to 1-1/4"-12 adapter, 1-1/4"-12 to 7/8"-14 adapter, 1-3/16" wrench for removing/installing primer ram and shell holder. - $350 I have another rifle (375 SnipeTac) that uses this press so that rifle would also have to sell before I'd sell the press.
Hornady full length 2 die set #544460 with extra expander ball - $350
(5) MTM Case-Gard BMG 10 ammo boxes - $25 for all
Stalwart 25-hole wooden loading block - $10
K&M neck turning cutter and case driver - $100
Sinclair 7/8"-14 expander die with 50 Caliber (.509") stainless expander mandrel, used to expand neck for neck turning brass. The die body has been shortened to prevent the shoulder from hitting die. - $40
Hornady modified case for measuring OAL - $10
Lee .510" bullet resizer - $10
Sinclair bullet comparator - $10
Sinclair shoulder bump gauge - $10
Shooting Solutions primer pocket uniformer - $15
RCBS 1-1/2"-12 collet bullet puller with .510" collet - $190
Punch block and modified punch for removing spent primers – uses BMG shell holder to hold case (shell holder not included) - $10
Forster 50 BMG case trimmer - $80
Lyman 50BMG multi tool - $45
Hornady extra large powder funnel - $10
All brass/loaded ammo was fully prepped. Prep steps – annealed, fired in my rifle, full length resized, trimmed to 3.900", necks turned just enough to clean up to .021"), inside/outside case mouth chamfered, primer pockets uniformed, flash hole deburred.
I can't ship powder or primers. Not sure about shipping loose incendiary bullets. Would need to be local pickup.
Apx 15 lbs. RE-50 – Combined 2 jugs of same lot powder into 1 jug to save shelf space - $600
3 jugs of WC-872 Milsurp pulldown powder – Apx 8+ lbs. per jug - $180 for all
692 CCI No. 35 Primers - $450
423 I blue tip incendiary Milsurp pulldowns – cleaned and resized - $320 for all
343 API silver tip armor piercing incendiary Milsurp pulldowns – cleaned and resized - $120 for all
202 Lehigh 800gr semi-bore rider match solids – included are 12 additional rounds that were collet pulled from loaded ammo so will show some loading/pulling marks - $350
100 GFL PECA 16 headstamp brass – I got this new unfired brass a while back when sold by Midway. This brass was made by RUAG for the Italian military. 75 are prepped, unprimed and ready to prime/load. 25 are primed and ready to load. - $250 for all
22 Lake City fired brass. One odd ball SPS headstamp thrown in. All of these were prepped (once fired in my rifle, annealed, resized, pockets uniformed, trimmed to 3.900", inside/outside case mouth chamfered, necks turned just enough to clean up to .021"). Ready to prime and load. - $25
30 rounds API silver tip ammunition – This ammo I hand loaded using fired in my rifle (not machine gun), Lake City brass. Looks like there is one PMJ brass in there. Primers are CCI No 35. Powder is 228gr of WC-872 pull down powder. Averaged 2880fps in my rifle. COAL varies a little but averages 5.430". Bullets used for this ammo were machine pulled so they do show some pull marks. All bullets were cleaned and resized before loading. MTM boxes are included with this ammo. - $150
30 rounds I blue tip ammunition – This ammo I hand loaded using fired in my rifle (not machine gun), Lake City brass. Primers are CCI No 35. Powder is 228gr of WC-872 pull down powder. Averaged 2880fps in my rifle. COAL varies a little but averages 5.430". Bullets used for this ammo were machine pulled so they do show some pull marks. All bullets were cleaned and resized before loading. MTM boxes are included with this ammo. - $150
RCBS AmmoMaster 2 single stage press. Includes 50 BMG shell holder, primer ram for flat and cupped 50 BMG primers, spent primer catch cup, 1-1/2"-12 to 7/8"-14 adapter, 1-1/2"-12 to 1-1/4"-12 adapter, 1-1/4"-12 to 7/8"-14 adapter, 1-3/16" wrench for removing/installing primer ram and shell holder. - $350 I have another rifle (375 SnipeTac) that uses this press so that rifle would also have to sell before I'd sell the press.
Hornady full length 2 die set #544460 with extra expander ball - $350
(5) MTM Case-Gard BMG 10 ammo boxes - $25 for all
Stalwart 25-hole wooden loading block - $10
K&M neck turning cutter and case driver - $100
Sinclair 7/8"-14 expander die with 50 Caliber (.509") stainless expander mandrel, used to expand neck for neck turning brass. The die body has been shortened to prevent the shoulder from hitting die. - $40
Hornady modified case for measuring OAL - $10
Lee .510" bullet resizer - $10
Sinclair bullet comparator - $10
Sinclair shoulder bump gauge - $10
Shooting Solutions primer pocket uniformer - $15
RCBS 1-1/2"-12 collet bullet puller with .510" collet - $190
Punch block and modified punch for removing spent primers – uses BMG shell holder to hold case (shell holder not included) - $10
Forster 50 BMG case trimmer - $80
Lyman 50BMG multi tool - $45
Hornady extra large powder funnel - $10
All brass/loaded ammo was fully prepped. Prep steps – annealed, fired in my rifle, full length resized, trimmed to 3.900", necks turned just enough to clean up to .021"), inside/outside case mouth chamfered, primer pockets uniformed, flash hole deburred.
