408 Cheytac

Terry Scott

Well-Known Member
Joined
Aug 31, 2010
Messages
317
Location
Reno Nevada
Anyone out there shooting one?
If so what is Brass and bullet availability? Cost?
Recoil?
Range?
How is the cartridge regards to copper fowling?
Looking at buying one, but need more information.
 
A friend of mine has a 408 (M310) in a McMillan A5 stock and a Night Force Scope......weight is north of 20#, it reminded me of carrying the M-60 back in the day. This said its a fun rifle to shoot but at $7per round you realy have to want to shoot it. He ordered a case of loaded ammo and has lot's of brass but the bullet selection is limited. I think the premium lathe turned bullets weigh 419gr and we chronoed it at just over 2900fps. We can not get a hold of any expanding bullets and it's not legal to hunt with solids in our state....none the less its an accurate rifle, we can consistantly get good results out to 1200yds, we have gotten hits to 1 mile but it should preform better but we have not had the time to stretch it out. As far as a hunting rig, its not really pratical 20#+ and a 30" barrel but it is cool to look at as long as you dont have to carry it around. With this weight and a the break the recoil is not bad at all. I did shoot it neeling without a break and it set me back a bit!!

For a hunting rig I would go with one of the 338 Mags, either the Lapua or Wby 33-378 if thats what you are looking for.
 
I actually had one custom made by DAVE VIERS and he did a terrific job! It is a standard .408 Cheytac,no variant. I have the gun and bi-pod,no glass yet or relaoding dies for it. I have factory ammo by Jamison International. That company went under and i know there is a few places that make the ammo and projectiles.

rocky mountian bullets makes jacketed lead bullets for the .408 cal.

at 7 bucks a shot im kindof hurtin for my .338 Edge back...over all its a gun im gonna keep as long as possible and do some LR hunting in the future.

Im a wine drinker on a beer budget currently. I don't like that but its what it is for me currently. I LOVE the gun and i've shot it 3 times. Facotry loads chrono'd at 2858,2950,2945.
 
Terry:

1. You will probably get many more responses if you post your inquiries regarding the 408 CT on SnipersHide's ELR forum - [URL="http://www.snipershide.com/forum/ubbthreads.php?ubb=postlist&Board=5&page=1"]http://www.snipershide.com/forum/ubbthreads.php?ubb=postlist&Board=5&page=1
[/URL]
2. Ammo is available from at least the following:
a. CheyTac - http://www.cheytac.com/index.php
b. HSM - http://store.thehuntingshack.com/408cheytac.aspx
c. KGI – http://www.knesekguns.com/commercial/408-375-Ammo
d. TTI Armory - http://www.ttiarmory.com/Balisticdata.html

3. Actually the preferred solution is the 375 CT. 2a-2c have ammo.
 
Last edited:
The 408 is a real comittment. unless you plan on shooting over 2500 yards....(allot) go with the 338's
 
Thanks All,.
I think after reading all of your comments I'll just go with a 338 Edge :)
Thanks Again


Good choice for a rifle that you ever want to hunt with....I have another buddy with a 338 edge and I'm very impressed thus far. Definately a more pratical ( and cost effective) solution.

Shooting extreme long range is fun, but time of flight becomes a real factor in a hunting situation....2 seconds is a long time when shooting at an animal.
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top