.338 lapua help

motzila

New Member
Joined
Apr 12, 2014
Messages
4
hi guys, I'm new here in the forum. first of all, my english is not good because it is not my native language.
I have a request. I bought a week ago my first .338 lapua magnum rifle. My question: does anyone have a load data with 300 grain Sierra HPBT an H1000 powder? The gun has a 9 twist rate and a barell length of 26 "
thank you
 
90 grains of H1000 in Lapua brass with Federal Primers (300 grain SMK). I crimp mine (Lee crimp die) and load 15 off the lands because thats all the mag will go.

On brass, Lapua, Nosler or Norma, nothing else is worth a shitte.

I actually have better grouping with the 250's than the 300's.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top