srhaggerty
Well-Known Member
I purchased some N570 to go with this combo but I'm unsure where to start. Looking at the manufacture's website there is a giant gap between loading for the 250gr class and the 265gr. Any advice would be appreciated.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
338 Lapua and 260gr Hammers
- Thread starter srhaggerty
- Start date
Help Support Long Range Hunting Forum
Absolute Hammer load data
I think this will work. @GLTaylor has been compiling load data from folks working up loads with the new Absolute Hammer bullets. Thanks to him for his hard work. I figured I would post it in a place where guys can find it more easily. If my link doesn't work then George can put his link in here.
Sorry, that was for Absolute Hammers.
www.longrangehunting.com
Hammer HHT Load Data
OK, folks. Finally got some data on the new HHT bullets to share. I'm sure this will grow exponentially as people have time to develop loads and share results. Remember to post your results on the "Share Your Hammer Loads" thread please. Posted 7/17/2023
And that was for the new HHT....
www.longrangehunting.com
Hammer Hunter Load Data, (See page 1, Post 8)
OK, folks. Steve at Hammer Bullets has been getting requests for load data on Hammer Hunter bullets. There is an extensive spreadsheet for Absolute Hammer Load Data developed and shared by members on this Forum. Data for Hammer Hunters is on the Hammertime Forum, but it has not been placed...
srhaggerty
Well-Known Member
Thank you! I attempted searching first but must not have put the right wording.
You're welcome.
Let us know how it all goes and what you end up with.
Send your data to GLTaylor so he can add it tot the list and help others out.
Let us know how it all goes and what you end up with.
Send your data to GLTaylor so he can add it tot the list and help others out.
srhaggerty
Well-Known Member
Nothing about N570 but RL33 and H1000 two powders I would like to try but can't get locally. I'll definitely send data when I have it!
Another great option is calling Steve at Hammer. He definately knows what works.
