• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

338 Edge/338 Rum Reloading Tools and Components

nchunter182

Well-Known Member
Joined
Feb 12, 2012
Messages
273
Location
Texas City Texas
I sold my 338 Edge so placing the following items up for sale. All prices would include shipping.

  • Redding Type-S neck sizing bushing die #71874 338 Ultra Mag (no bushings included), Hornady Custom Grade New Dimension 2-Die Set #546389 338 Ultra Mag. These can also be used on the 338 Edge when adjusted properly. - $120
  • Custom made Whidden Gunworks 338 Edge neck bushing full length sizer die, 8 bushings .360" to .367". - $225
  • (89) Berger 338 Cal 300gr Elite Hunter - $70
  • (90) Nosler 338 Cal 300gr AccuBond - $115
  • (50) Nosler Brass, (25) prepped and primed with Federal 215M – Ready to load, (25) are in fired condition, all brass has 2-3 firings - $120
  • (29) Loaded rounds, Norma brass, Fed 215 primer, 89.5gr H1000 powder, 300gr SMK, .030" jump, (15) Norma prepped and ready to load, (6) Norma fired condition – $160 for all
  • (22) Loaded rounds, Nosler brass, Fed 215M primer, 92.0gr H1000 powder, 300gr Berger EH, .005" jump, (1) Nosler prepped and ready to load, (24) Nosler fired condition – $160 for all
  • 338 Edge Pacific Tool & Gauge pilot finish reamer and Manson 300 RUM (same as 338 Edge) GO gauge. This reamer is throated for the 300 Berger EH and will give a COAL of ~3.950" when seated to the lands. Used to cut one chamber in my 338 Edge. - $200

FYI – Brass prep steps:
Annealed
Sized minimum to fit chamber
Trimmed to length
Case mouth inside/outside chamfered
Necks skim turned to give ~80% cleanup
Primer pockets uniformed, Primer flash hole deburred


IMG_0834.JPGIMG_0835.JPGIMG_0836.JPGIMG_0837.JPGIMG_0838.JPGIMG_0839.JPGIMG_0840.JPGIMG_1076.JPG
 
Updated list.

  • Redding Type-S neck sizing bushing die #71874 338 Ultra Mag (no bushings included), Hornady Custom Grade New Dimension 2-Die Set #546389 338 Ultra Mag - $120
  • Custom made Whidden Gunworks 338 Edge neck bushing full length sizer die, 8 bushings .360" to .367". - $225
  • (50) Nosler Brass, (25) prepped and primed with Federal 215M – Ready to load, (25) are in fired condition, all brass has 2-3 firings - $120
  • (29) Loaded rounds, Norma brass, Fed 215 primer, 89.5gr H1000 powder, 300gr SMK, .030" jump, (15) Norma prepped and ready to load, (6) Norma fired condition – $160 for all
  • (22) Loaded rounds, Nosler brass, Fed 215M primer, 92.0gr H1000 powder, 300gr Berger EH, .005" jump, (1) Nosler prepped and ready to load, (24) Nosler fired condition – $160 for all
 
Last edited:

Recent Posts

Top