338 Edge/338 Rum Reloading Tools and Components

[nchunter182]

I sold my 338 Edge so placing the following items up for sale. All prices would include shipping.

• Redding Type-S neck sizing bushing die #71874 338 Ultra Mag (no bushings included), Hornady Custom Grade New Dimension 2-Die Set #546389 338 Ultra Mag. These can also be used on the 338 Edge when adjusted properly. - $120
• Custom made Whidden Gunworks 338 Edge neck bushing full length sizer die, 8 bushings .360" to .367". - $225
• (89) Berger 338 Cal 300gr Elite Hunter - $70
• (90) Nosler 338 Cal 300gr AccuBond - $115
• (50) Nosler Brass, (25) prepped and primed with Federal 215M – Ready to load, (25) are in fired condition, all brass has 2-3 firings - $120
• (29) Loaded rounds, Norma brass, Fed 215 primer, 89.5gr H1000 powder, 300gr SMK, .030" jump, (15) Norma prepped and ready to load, (6) Norma fired condition – $160 for all
• (22) Loaded rounds, Nosler brass, Fed 215M primer, 92.0gr H1000 powder, 300gr Berger EH, .005" jump, (1) Nosler prepped and ready to load, (24) Nosler fired condition – $160 for all
• 338 Edge Pacific Tool & Gauge pilot finish reamer and Manson 300 RUM (same as 338 Edge) GO gauge. This reamer is throated for the 300 Berger EH and will give a COAL of ~3.950" when seated to the lands. Used to cut one chamber in my 338 Edge. - $200

FYI – Brass prep steps:
Annealed
Sized minimum to fit chamber
Trimmed to length
Case mouth inside/outside chamfered
Necks skim turned to give ~80% cleanup
Primer pockets uniformed, Primer flash hole deburred

 

[crystalgayleguy]

Payment options please

 

[nchunter182]

USPS Money Order is typically the preferred method. However, I do have Zelle and like that method as well.

 

[duramaxfxr2]

If you could take venmo I'd take the nosler and berger bullets..let me know

 

[Bghunter338]

I'll take the accubonds if there still available?

 

[nchunter182]

If you could take venmo I'd take the nosler and berger bullets..let me know

Sorry but I'm not set up for Venmo. Since you responded first on these, if you can make payment some other way they are yours.

 

[duramaxfxr2]

I'm not set up for Bellevue at this time...thanks for the chance but go ahead and sell em

 

[duramaxfxr2]

Zelle*

 

[nchunter182]

I'll take the accubonds if there still available?

They are yours if you want them. I've sent you a PM.

 

[nchunter182]

Updated list.

• Redding Type-S neck sizing bushing die #71874 338 Ultra Mag (no bushings included), Hornady Custom Grade New Dimension 2-Die Set #546389 338 Ultra Mag - $120
• Custom made Whidden Gunworks 338 Edge neck bushing full length sizer die, 8 bushings .360" to .367". - $225
• (50) Nosler Brass, (25) prepped and primed with Federal 215M – Ready to load, (25) are in fired condition, all brass has 2-3 firings - $120
• (29) Loaded rounds, Norma brass, Fed 215 primer, 89.5gr H1000 powder, 300gr SMK, .030" jump, (15) Norma prepped and ready to load, (6) Norma fired condition – $160 for all
• (22) Loaded rounds, Nosler brass, Fed 215M primer, 92.0gr H1000 powder, 300gr Berger EH, .005" jump, (1) Nosler prepped and ready to load, (24) Nosler fired condition – $160 for all

 

[Gatr]

I'll take the bergers

 

[nchunter182]

I'll take the bergers

Sent you a PM.

 

[nchunter182]

Bergers sold. List above has been updated.

 

[nchunter182]

All SOLD
Thanks!