300 rum - load development round 2

[Barrelnut]

A few years ago, I used to run a faster load with H1000. Was 89 GR. At 3120 with the 210 VLD. It was a good node and shot consistent. I backed it down to the 2960 node 2 years ago. I took an elk at 517 yards. It was more than enough. One 30 Cal entrance and two quarter size exits.
Here's an old pic of the 89 GR. Load

 

[Barrelnut]

Here's a 550 yard cold bore shot with the 87 GR. H1000 load. I was shooting at the black spot on the right side.

 

[tbrice23]

A few years ago, I used to run a faster load with H1000. Was 89 GR. At 3120 with the 210 VLD. It was a good node and shot consistent. I backed it down to the 2960 node 2 years ago. I took an elk at 517 yards. It was more than enough. One 30 Cal entrance and two quarter size exits.
Here's an old pic of the 89 GR. LoadView attachment 126441

.020 jump... single shot or do you have a Wyatt's box?

 

[Barrelnut]

.020 jump... single shot or do you have a Wyatt's box?

Good catch. Yes, single shot. I just checked OAL on a loaded round and it is 3.860. LOL
It is a dedicated LR rifle. So I'm ok with single loading them.

 

[Tidus56]

Have y'all tried RL33. Don't have the numbers on me but I think the velocity and powder fill were great. I will take a look when I get home.

 

[tbrice23]

Have y'all tried RL33. Don't have the numbers on me but I think the velocity and powder fill were great. I will take a look when I get home.

Im using 100gr Reloder 33 with 200gr Accubonds. Around 3250 fps from 26" factory Remington barrel.

 

[Tidus56]

Seems right, I was thinking it was 100 grains with a 215 Hybrid at 3150

 

[MontanaRifleman]

Have y'all tried RL33. Don't have the numbers on me but I think the velocity and powder fill were great. I will take a look when I get home.

Check post #14

 

[Tidus56]

Check post #14

Nice!

 

[DoubleGobble00]

How temperature stable is RE33?

 

[MontanaRifleman]

How temperature stable is RE33?

Here's an old thread on that subject
https://www.longrangehunting.com/threads/rl33-temperature-regression-thread.130521/