300 prc

[SeboCreek]

I use 77.5 Rel 26 with 199 HH In 300 PRC.
FYI

 

[Chaddrx]

I use 77.5 Rel 26 with 199 HH In 300 PRC.
FYI

What barrel length, twist, and speeds are you getting?

 

[SeboCreek]

24 inch barrel. Loaded up to 78.5 getting 3055, but 77.5 more accurate Getting 2975. Barrel is 9 twist.

 

[snox801]

24 inch barrel. Loaded up to 78.5 getting 3055, but 77.5 more accurate Getting 2975. Barrel is 9 twist.

Mine got very accurate towards the top. I had one charge I was pretty sure was better but I wasn't gonna mess with a spread of 3fps over my 5 shot group. As long as it was around .5 Moa I'll take the tighter spread all day for long range work. Then again I'm not sure I shoot well enough to say it's me or the load when you get under .5 moa

 

[nwmnbowhunter]

What is your 300 prc load and specs with the 199HH. I just built a 300 prc and looking to load the hammers as well.

Check the hammer bullet load thread.

26 inch 9 twist barrels
ADG brass 76gr 26
Coal 3.63
Cci 250

Lapua brass
N570 83gr

Both like right around 3100-3120