Jayjay
Well-Known Member
I have a stock Remington 700 in 270 wsm . was looking for a little load data for the 145 ELD X bullets
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
270wsm with 145 eldx
- Thread starter Jayjay
- Start date
Help Support Long Range Hunting Forum
What powder do you have on hand?
Jayjay
Well-Known Member
I have rl 17 & 19 & 22 &4831sc & 7828 sc. Just about about anything really. Just need a good starting point.
RL19: 53.9 (2800 FPS) to 61.7 (3100 FPS)
H4831SC: 55.8 (2800 FPS) 63.3 (3100 FPS)
24" 1:10" WW brass WLRM COAL 2.860"
(SOURCE: Hornady 10th ed)
Hello:
I worked up a load with the 145 eld-x in my Tikka 270 wsm with reloader 26 that turned out to be
the most accurate hunting load that I,ve ever tested. I Did a ladder test for seating depth and it came
up with an oddball .080 from lands.
I worked up to 67.3 grains with Fed 215 primers and got an average of 3210 fps, slighty flattened
primers and constant sub 1/4" groups at 2.900 oal.
Every rifle likes something else but this is what worked for me.
I worked up a load with the 145 eld-x in my Tikka 270 wsm with reloader 26 that turned out to be
the most accurate hunting load that I,ve ever tested. I Did a ladder test for seating depth and it came
up with an oddball .080 from lands.
I worked up to 67.3 grains with Fed 215 primers and got an average of 3210 fps, slighty flattened
primers and constant sub 1/4" groups at 2.900 oal.
Every rifle likes something else but this is what worked for me.
Trm82
Well-Known Member
Why don't you just find load data in maybe the nosler books for a 150 gr and start low and just work it up from there ? Seems pretty safe to me.
You can get Alliant data here:
http://www.alliantpowder.com/resources/catalog/2017/2017_Alliant_Powder.pdf
Hodgdon Date here:
Take Aim at Rifle Reloading Data | Hodgdon Reloading
I load my REM700 270WSM with MagPro: 130gr Sierra ProHunter with 74.5gr, 140gr Accubond with 72.0gr, 150gr SGK with 69.0gr
Also, now working on Alliant 4000-MR with 150gr SGK and it's looking good.
Neither H4831SC, IMR4350, nor IMR7828 did well for me.
http://www.alliantpowder.com/resources/catalog/2017/2017_Alliant_Powder.pdf
Hodgdon Date here:
Take Aim at Rifle Reloading Data | Hodgdon Reloading
I load my REM700 270WSM with MagPro: 130gr Sierra ProHunter with 74.5gr, 140gr Accubond with 72.0gr, 150gr SGK with 69.0gr
Also, now working on Alliant 4000-MR with 150gr SGK and it's looking good.
Neither H4831SC, IMR4350, nor IMR7828 did well for me.
