BigSwede
Well-Known Member
Anyone willing to share accurate loads for 270 WSM? Going to start with berger 140 vld's and 140accubonds. Give specifics if you would and ...hell, post photos of your best groups. Thank you
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
270 WSM pet loads? its t
- Thread starter BigSwede
- Start date
Help Support Long Range Hunting Forum
BigSwede
Well-Known Member
Hornhunter32
Well-Known Member
What is your load?
I think my dad's load is:
Browning Bar 270WSM
66gr Retumbo
150gr SST
Rem Mag primer
Win brass
I think my dad's load is:
Browning Bar 270WSM
66gr Retumbo
150gr SST
Rem Mag primer
Win brass
BigSwede
Well-Known Member
Nice. Ill have to try that. The load that printed a half dozen groups in the 1's-2's from out of the box Tikka was 63.0 of AA3100 fed brass, WLRM primers velocity only 2940's but who cares..
One of my rifles that never displayed a lot of accuracy potential suddenly started shooting very well with a similar load of Retumbo and 140 accubond.
I was not pleased with the performance on game(dime sized exit holes)and currently shoot a 130 Berger Classic Hunter and RL 22 in that rifle at a whopping 3000 fps. The load has been devastating on deer out to 400+(fist sized exit holes). I can load the same bullet up to 3200+.
I was not pleased with the performance on game(dime sized exit holes)and currently shoot a 130 Berger Classic Hunter and RL 22 in that rifle at a whopping 3000 fps. The load has been devastating on deer out to 400+(fist sized exit holes). I can load the same bullet up to 3200+.
tikkat3270wsm
Well-Known Member
Noz 140gr ballistic tips, win brass, fed 215m primer, RL19 61gr.
Gun is a Tikka T3 lite Stainless. 100yd ,.430, 200yd,.680, 300yd, .75, 400yd 2.0.
Do not know what the jump is. had a smith load the first 50 and loaded the rest to that. Velocity is 3080, verified . cannot locate to pics to prove info above.
enjoy and I hope the info helps
Gun is a Tikka T3 lite Stainless. 100yd ,.430, 200yd,.680, 300yd, .75, 400yd 2.0.
Do not know what the jump is. had a smith load the first 50 and loaded the rest to that. Velocity is 3080, verified . cannot locate to pics to prove info above.
enjoy and I hope the info helps
waspocrew
Well-Known Member
My Tikka T3 liked this combo:
61 Grs RL-22
140 AB
Fed 215 Primer
2.85 OAL (Mag length)
Velocity is on the slow side (2850), but it shot so great, I didn't care to mess with it. 2 WY black bears never complained about the velocity either!
61 Grs RL-22
140 AB
Fed 215 Primer
2.85 OAL (Mag length)
Velocity is on the slow side (2850), but it shot so great, I didn't care to mess with it. 2 WY black bears never complained about the velocity either!
BigSwede
Well-Known Member
lightflight
Well-Known Member
- Joined
- Mar 29, 2012
- Messages
- 231
Are you guys shooting 5 shot strings with a sporter contour barrel? Or you spacing them out a bit. My barrel gets hot fast.
I'm shooting 130gr ttsx around 3300 using r19
I'm shooting 130gr ttsx around 3300 using r19
BigSwede
Well-Known Member
Re: 270 WSM pet loads?
I try to wait a few minutes between shots but not crazy amounts of time like some guys. I'm on a workin mans schedule. I did get a chance to verify my load/velocity 3065fps to 600yds. Droppin 10.7minutes at sea level.
I try to wait a few minutes between shots but not crazy amounts of time like some guys. I'm on a workin mans schedule. I did get a chance to verify my load/velocity 3065fps to 600yds. Droppin 10.7minutes at sea level.
Trm82
Well-Known Member
In my T3 I'm shooting the 129 gr lrx @ 3420 fps with rl17.
