270 speer 130gr. btsp Load data

clark270

Well-Known Member
Joined
Feb 21, 2013
Messages
162
Location
The Dam, WI.
I don't have a Speer data book and can't find this bullet on their website. Ok, I have federal 210 primers, Reminton & Federal brass, W760,Imr 4350, H4350 powders can anyone look up a min and max load for the speer 130gr. bullet for me? It's out of my Winchester M70 sporter 24" barrel.
 
Clark-- This from the #14 Speer manual--it does not account for your brass or primer-- all three of your powders are listed. 760-- 50 min.-54 max. H4350--52 min.- 56 max. IMR 4350--51 min.- 55max. The 760 used mag primer.--Bill
 
Thoughs are all good loads ,but the first thing I would do is decide what brass I would use.Federal brass is a little thicker than Remington.When you get close to max loads the pressure is differant.I found out the hard with a 270.Ihad been using Remington and not knowing better I loaded them up in federal and locked my rifle. So now I stick with one type of brass for each gun.The best load I have found with any 130 gr bt Speer, Sierra ,Nosler or Breger is 60 grs of h4831
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top