25 creed data needed

[sierracharlie338]

I'm helping a friend of mine that wants to build a 25cm and am trying to find the neck measurement of Alpha 25creed brass loaded with Berger 135s. If anyone has or can get those numbers it would be appreciated.

I am also trying to track down reamer prints of what I believe is the 3rd and final reamer print that blackjack put out before they went under. If I'm wrong on that please correct me. I have read where there is a .115 freebore and a .130 freebore. I've only been able to locate the .115 freebore prints.

Ultimately he wants to run the 135s around 2850-2900 in a 22 inch barrel if possible because he will be running a suppressor full time.

Thanks
Sc

 

[Justice1327]

I actually will start loading my 25 Creed tomorrow. I will use Alpha Brass with the 135s so once I get it loaded I will message you.

 

[sierracharlie338]

I actually will start loading my 25 Creed tomorrow. I will use Alpha Brass with the 135s so once I get it loaded I will message you.

Outstanding thanks man. Any idea what reamer you used or its specs?

 

[sierracharlie338]

@lancetkenyon any suggestions brother?

 

[Hydra6]

Multiple threads on Snipers Hide for 25 Creed load data. I shot with a pro on my squad at MPA 2 day last weekend shooting 25 Creed. 130 class projectiles interesting niche between 6mm 100+ and 6.5 140+.

 

[sierracharlie338]

Multiple threads on Snipers Hide for 25 Creed load data. I shot with a pro on my squad at MPA 2 day last weekend shooting 25 Creed. 130 class projectiles interesting niche between 6mm 100+ and 6.5 140+.

Yeah ive looked there too and the data about the reamers is MIA for the time being

 

[Hydra6]

I would ask Alpha Munitions https://alphamunitions.com/contact/

 

[lancetkenyon]

I will have to get you neck measurements with the alpha brass.

I used the 25CM BJ2 reamer for both my 25s. Great reamer. I believe FB is .115".

I am running Lapua 6CM SRP brass necked up to .25 in my 26" heavy target rifle. H4350 amd 135s @ 2986fps suppressed.

I am running Alpha 25CM SRP brass in my lighterweight 26" hunting 25CM. H4350 and 133 Elites @ 2975fps.
Alpha brass is actually lighter than Lapua, and has a hair more case capacity,so charge weights need to be upped about .2gr to get same speeds.

I can see 2850 is a 22" suppressed. 2900 maybe, but it will probably be a warm load with H4350 to get there.

 

[sierracharlie338]

I will have to get you neck measurements with the alpha brass.

I used the 25CM BJ2 reamer for both my 25s. Great reamer. I believe FB is .115".

I am running Lapua 6CM SRP brass necked up to .25 in my 26" heavy target rifle. H4350 amd 135s @ 2986fps suppressed.

I am running Alpha 25CM SRP brass in my lighterweight 26" hunting 25CM. H4350 and 133 Elites @ 2975fps.
Alpha brass is actually lighter than Lapua, and has a hair more case capacity,so charge weights need to be upped about .2gr to get same speeds.

I can see 2850 is a 22" suppressed. 2900 maybe, but it will probably be a warm load with H4350 to get there.

Appreciate ya brother!

 

[Justice1327]

Outstanding thanks man. Any idea what reamer you used or its specs?

Alpha 25 Creedmoor SRP
135 Hybrid:
COAL: 2.902 at lands
.282 empty case neck
.284 loaded

133 EH:
COAL: 2.890 at lands
Same neck measurements as 135

see attached reamer

 

[sierracharlie338]

Alpha 25 Creedmoor SRP
135 Hybrid:
COAL: 2.902 at lands
.282 empty case neck
.284 loaded

133 EH:
COAL: 2.890 at lands
Same neck measurements as 135

see attached reamer

Thanks exactly what I was looking for