One of my favorite bags for long range shooting is just too heavy.
This will be good fit for shooters looking to lighten up their packs and bag weights.
Ultra Light weight:
Non-Shearing (does not break apart)
Lightest fill available...
Box to Bench Precision is excited to announce the release of The Ultimate Hunting Target!
This target will have 15 scenarios to work through at 100 yards. Once completed, you will have tested the rifle, scope, and shooter with over 700 MOA or 200 Mils of scope adjustments.
Here are 2...
There are plenty of documented cases of barrels that speed up until you reach 100-150 rounds. We experienced it at around 70 rounds in our current project. We need to use almost a grain lower in powder to get the same speed. We have shot 85 rounds now.
How do others deal with this?
We are only 13 rounds in, and the rifle is doing very well.
Grs Bifrost Stock, Benchmark Barrel 8.5 twist drop in, Savage Action with 1lb trigger spring, APA little Bastard Break, Atlas Bipod, Northland Shooter Lug, and Vortex PST Gen 2. We are shooting new Nosler brass that has been...
I decided to do a ladder test with 7828 SSC out of my 7 Mag. The gun was shooting well with the 7828 SSC node. I decided to go with mostly .3 grains steps instead of .2 grains. We were talking about how most ladder tests are done with only one round per charge weight, so I wanted to change...
Anyone use these?
From the maker of the collet die:
The gauge on top of out Belted Magnum Collet Resizing Die shows the average SAAMI spec chamber. However, that may not be the same asYOUR particular chamber. Years ago, I found that shooters were using our collet die to...
For you Mil shooters, we developed some Milliradian stickers. They are .1-.5 Mils and are comparable in pricing to Midways Sticker prices. You can get them in 100 yards or 100 meters.
I was reading a post about annealing and the vast differences shooters take regarding the subject. Some don't anneal, some anneal every 2nd or 3rd round, some burn their brass with torch heads, some use Tempilaq which only shows you get your brass to a certain temperature, some use an AMP...
Annealed vs not annealed
I shot two groups of 5
This season has been kind of busy for me. I have been loading and shooting without double checking a couple things. With the previous group, I had the excessive trim length and also I was kissing the lands or a little jump in the last group. So...
I donated my time and was able to help the owner of a special late season hunt for whitetail here in Northeast Washington. This buck in the film is 1.10 miles. You can count tines and get a great idea what your looking at as far as trophy quality. He was looking for a buck over 150". He was...