McGuire Ballistics Field Reports

Phil Rizzo said:

Do we need barrel tuners for monos?
Add a pressure point?

Ok Sam, just kidding.

Click to expand...

Phil Rizzo said:

A new day has dawned….

Click to expand...

McGuireBallistics said:

7PRC
151OSN
3180MV
282 YARDS
ENTRY ON LEFT SIDE

Click to expand...

T_the_Tinkerer said:

Just an assumption, but the prototype bullets may forgo pressure grooves for something more subtle/aerodynamic? this bullet looks like it has a really long ogive.

Click to expand...

Phil Rizzo said:

How does the actual bearing surface length compare, to the Copper Rose 143&160 with relief grooves?

Click to expand...

McGuireBallistics said:

I dont want to say too much at this point but we are working on keeping the positives of the copper rose line and see if we can get a performance boost. Basically a Copper Rose 2.0. We have protos from .224-.375 ready for testing and the 151 is going to do the heavy lifting for the testing side. We will release more info as we go but what I can say is there has been massive performance increases over existing bullets we make.

Click to expand...

Phil Rizzo said:

Appears you are well on your way.
Will the same twist recs apply for larger CR weights, within caliber?
In case some whacko decided to build a rifle based on a bullet, for about the 8th time…?! Maybe.

Click to expand...

McGuireBallistics said:

I dont want to say too much at this point but we are working on keeping the positives of the copper rose line and see if we can get a performance boost. Basically a Copper Rose 2.0. We have protos from .224-.375 ready for testing and the 151 is going to do the heavy lifting for the testing side. We will release more info as we go but what I can say is there has been massive performance increases over existing bullets we make.

Click to expand...

McGuireBallistics said:

I dont want to say too much at this point but we are working on keeping the positives of the copper rose line and see if we can get a performance boost. Basically a Copper Rose 2.0. We have protos from .224-.375 ready for testing and the 151 is going to do the heavy lifting for the testing side. We will release more info as we go but what I can say is there has been massive performance increases over existing bullets we make.

Click to expand...