Yeah, can't get much more in the case.I love that combo. I'm just under 45 gr of Varget with the 120 HH. Great success hunting whitetails. Couple of 250+ yard shots and no tracking.
Yeah, can't get much more in the case.I love that combo. I'm just under 45 gr of Varget with the 120 HH. Great success hunting whitetails. Couple of 250+ yard shots and no tracking.
Inter bonds are hard compared to other cup and core bullets, same as accubonds . That's were accuracy issues come from! but the inter bonds don't bond cup to core unless heated up at high speed down the barrel. don't know this is fact but have info that if shot sub sonic they will open up quite quickly. Maybe someone with more knowledge on this will weigh in.FWIW, I've found interbonds very picky to get accuracy I come to expect out of accubonds and Hornady spire points.
Don't fix it if it isn't broken!I worked a load for two 7-08 rifles I had and found a good load with the 139 grain interbond with h4350 and an awesome load with h4895. One barrel was a 26 inch proof and the other was a 24 inch factory barrel. I don't have my data in front of me but I will see if I can find it. I like Varget but never tried it because the h4895 shot bugholes.
This^^^^. I shot 130s in 270 Hornady Light Magnum loads running well over 3150 or so for a good while. Even as close as 25 yards they would zip right thru and leave a quarter sized exit on our whitetails.. Usually got a run of 30 yards or so if just behind the shoulder. It's a great bullet for high shoulder on deer. It's a tough bullet that mushrooms well.If your goal is to shot past 300 yds with this bullet, and being that it's a bonded bullet, you need to push it fast for proper expansion.