DuckHunt
Active Member
Anyone have a good load for these bullets. Shooting a CA MESA in 7mm08. Thanks!
139gr Interbond - 7mm08
- Thread starter DuckHunt
- Start date
Help Support Long Range Hunting Forum
std7mag
Well-Known Member
Depends on what you want to do with it.
The Interbond essentially shoots the same as the SST & 140gr Nosler Ballistic Tip.
I've used H4895, H414, IMR 4350, H4350, RL15, RL17, RL19, PP2000MR with bullet weights from 100gr-160gr.
Pick a powder and start with a starting charge.
The Interbond essentially shoots the same as the SST & 140gr Nosler Ballistic Tip.
I've used H4895, H414, IMR 4350, H4350, RL15, RL17, RL19, PP2000MR with bullet weights from 100gr-160gr.
Pick a powder and start with a starting charge.
Bang4theBuck
Well-Known Member
I've used H4350 and that IMR powder that replicates it. Enduron something or other, but they quit making it. BR2 PRIMERS and loaded .020" off the lands. This gave me a little more powder capacity than the book allowed for. Good luck. I love my 7mm-08.
john k
Well-Known Member
H-4350, IMR4350, and RL17 for me in the 140 weight bullets. IMR4350 most accurate but the slowest. I know a few of the guys use Varget. I use Varget for the 120 HH's and it's excellent. Love loading/hunting/shooting my 7-08. Good luck!
Is Inter bond the only bullets you have. Because they are expensive and hard to find. SSTs works well, very well in fact. And are much less costly and available.
I would use varget, always my go to for the 7mm08
cabelasken
Well-Known Member
H4350 gave good velocity but Varget is always a good choice with this case capacity. After getting very good velocity with Sta-bil 6.5 in my creedmore, I will try it in my 7-08 this spring.
birddog 68
Well-Known Member
IMR 4350 is my go to powder for 139-140 grain bullets. W760 works well also.
Interbond seem to be somewhat sensitive to seating depth so I would definitely play with jump to tighten up groups.
Interbond seem to be somewhat sensitive to seating depth so I would definitely play with jump to tighten up groups.
RAGGED EDGE
Well-Known Member
That would probably be IMR-4451.
Bang4theBuck
Well-Known Member
That's the one!
hicountry1
Well-Known Member
I could never get the **** things to shoot worth a crap
If your goal is to shot past 300 yds with this bullet, and being that it's a bonded bullet, you need to push it fast for proper expansion. That said, RL16, RL17, CFE223, and Power Pro 2000 will get you the most speed. I've also read Staball pushes bullets fast.
