Recommend cantilever Scope Mount, please

Thanks all you guys for the suggestions and comments. I'm going back to the range Wednesday with the new Set up and a fresh ladder of 123 SST's to see if I have the problem put to bed. So far, my best was .68MOA before the front mount worked loose but I'm exploring the 41.0 to 42.5 grain range (H4350) to see if there is more to be gained. I hope there is!

BoBro makes one of the best. One and done and always holds zero when taking on and off.

Here's another one that's very worthy to consider.
it's what i use on my kitty Kat ..

https://www.griffinarmament.com/30mm-gpm-cantilever-mounts-15moa-all-heights/

I have used the Burris P.E.P.R. mounts a few times and like them alot.

I have several of them myself, and I too like them a lot.

For the next project I bought an Arken optic and while I was researching them I discovered these: https://cameralandny.com/shop/tags/...0aff-013c-49cf-00163e90e196?variation=3535985 and for the price I figured to give one a try. If it doesn't work out I'll be buying another PEPR.

Larue!

I like the cantilever mounts from White Oak Arms....I have a few of them on my service rifles and match rifles. Decide what height you want with the scope rings you wish to use and you're good to go. Price is $95.00.

LaRue and ADM are what I've had the best luck with. The LaRue especially are pricy but they are worth every penny. I use their QD mounts and have not yet had an issue with POI shifts

Hoss50 said:

I have used the Burris P.E.P.R. mounts a few times and like them alot.

Click to expand...

Have the 34 mm Burris P.E.P.R. mount on my 6.5 Creedmoor AR10, added a riser as well.

Personally, I'm an ADM QD fan when my wallet allows. They have lots of options and super high quality.

YZ-80 said:

I ended up with this. It just made the most sense and the price was right. The torque specs on the base screws are ridiculous at 65 in./Lbs. Maxed out the Fat wrench. By comparison, the separate ring set up was 1 connection per ring at 20 in/lbs. Dropped the scope to 2.76" above bore axis. Should be OK for my purposes. Thank you all for you comments.


View attachment 519336View attachment 519342

Click to expand...

Are you sure that is not like 4" too far to the rear. I find eyepiece just behind the charge handle as shown by @C.O. Shooter is just about right.

C.O. Shooter said:

View attachment 519977

Click to expand...

One of the things that I like the most about the PEPR mounts is that they are offered w/o the QD option. Not a feature that I find useful or desirable.

Quinncannon said:

I like the cantilever mounts from White Oak Arms....I have a few of them on my service rifles and match rifles. Decide what height you want with the scope rings you wish to use and you're good to go. Price is $95.00.

Click to expand...

Do you have a link? I'm not finding them.

Vortex cantilever about $149.00 rock solid.