Checking out the 308 for deer season in November and I found that 3 Position Safety does not go into safe or bolt lock position. Using a paracord tied to vice I was able to rotate bolt safety shroud clockwise 15 degrees past the detente and able to actuate safety lever to middle position bolt...
Looking for reload data for 270 WIN with 145 gr. ELD-X using H4350
This bullet is not in my 9th edition Hornady reload manual and I cannot find reload data online so I extrapolated data from 140 gr and 150 gr bullets from the Hornady manual for H4350 powder and came up with start of 53.65 gr and...
V\Black Tail Hunter
I found and ordered a new Mini 7mm USB Flexible Inspection Camera Microscope Endoscope Borescope for $45 and Supereyes Borescope Side View Mirror Set 30 45 60 degrees for Supereyes Borescope N005 N013J for $15 on Amazon. The 7mm should work with my 308 and above caliber...
What is the best fitting picatinny rail for a 700 308 TAC-SA? Looking for a base that will fit the receiver like a glove so I do not have to bed the bases to the action.
I am just getting started with long range hunting with the order of a Remington 700 SPS TACT AAC-SD 308 and would like to know which accessories will best match the rifle. I eventual plan to use the rifle for hunting mule deer, antelope and varmints.
What do you recommend for bases, rings...
Bigngreen
First let me say, I really appreciate the help and the reply. I am just starting back into reloading after a 15 year hiatus. I did some reloading in the 60s with a Lee hand loader and then some reloading in the early 90s.
I am having a problem wrapping my mind around the concept...
I do not have access to a wet grinder so taking .100 to .250 off the dies is not an option. I have tried different shell holders, swtched from a RCBS 43 to an RCBS 4. I am still coming up with the cartridge shoulder .003 too long as measured with of all things the Hornady Lock and Load...
It is still bumping the shoulder forward. I adjusted die all the way down, shoulder is .003" forward and cannot close bolt on case. I will wait on Hornady to send replacement die.
Thanks